WL-FA5200PLC Smart RFID card laminator

This machine is controlledby PLC system, with mechanical liquid pressure system which is noted for its high precision and high volume cards producing rate. Multi lever pressing mode is mounted on this machine. Single Jar output with auto steady lever. Heat and cooling combine units sets machine working independent, The liquid pump station output two independent input liquid pressure. To the system the heating combine units machine using an imported control module to control the temperature and setting. For the function of temperature to stable. Cooling and heating combine units machine is using the pressure to operating the system by independent sensor data reader to the PLC system. To stable the pressure and with auto lock by the liquid pump

Using auto sensor touch panel to control setting
(1)Low sound,
(2)Electrical system easy to maintain
(3)Stable operation with auto alarm signal
(4)Single jar output with auto stable fixing
(5)Multi layer press output or optional.
(6)Temperature and pressure auto fixing setting stable.
(7)Temperature and pressure control with high precision
(8)ManuaLoperation function acceptable, independent unit system
Can be operation (with optional) l Suitable to all layer of Card with multi-layer (Special for non-IC card with layer combine assembly request)

Input Power: AC 380v/50HZ
Total power: 23 kw
Working Station: Heating and Cooling Combine Units
Combine layer: Heating and Cooling both with 5 layer.
Pressure Grade: 1-4 grade (Adjustable)
Pressure Area: 0-30MPA
Temperature area: 0-400
Temperature Setting: 0.5 (Adjustable)
Timing Precision: 0.1 second
Weight: Approximately 320kgs
Layer Dimension: 420mm*600mm(Optional)
Outlook dimension: 1970xW850xH1700mm

• WL-A4 Water and air cooling laminator
• WL-FA1000 Laminator