Detailed Product Description
PES Membrane General Grade Filter Cartridges
Available in a variety of configurations allowing easy installation in virtually any filtration system.
High Contaminant Holding Capacity
Non-Fiber Releasing
Provide outstanding particle retention while maintaining high flow rates.
Enhanced porosity results in low differential pressures and extended filter life.
Suitable for Final filtration Application
Fast Rinse-Up to 18 Megohm-cm
Product Specifications
Retention Ratings: 0.1, 0.2, 0.45, 0.65, 1.2um
Maximum Differential Pressure:
70 psid @ 68º F(4.8 bar @ 20º C)
36 psid @ 150º F (2.5 bar @ 65º C)
Recommended Changeout Differential Pressure: 35 psid (2.0 bar)
Purity:
PESG Series filter cartridges are free of surfactants, anti-static agents, binders, and adhesives.
Sterilization:
Multiple autoclaving for 30 minutes at 121º C under no end load conditions.
Materials of Construction:
Filter Media: Single layer of hydrophilic polyethersulfone membrane
Endcaps: Polypropylene
Extended Core*: Polypropylene
Gaskets/O-rings*: Silicone, Buna N, Viton A, EPDM, T = PTFE
Typical Effective Filtration Area: >0.6 cm2 per 10inch(250mm) cartridges
Dimensions (nominal):
Outside Diameter: 2.7inch(68mm)(nominal)
Lengths: 5inch, 250mm, 10inch(254 mm), 500mm, 20inch(508mm), 750mm, 30inch(762 mm), 1000mm, 40inch(1020mm), 50inch (1270 mm), other special available.
Applications
DI Water
High purity water
Washing machine
Final filtration of Pharmaceutical and biological.
Beer, Beverage, Mineral water