| |
| Specification |
|
| DVB-S Tuner |
Frequency Range 950 …. 2150 MHz Signal Level - 65 dBm …. - 25 dBm Signal-to-Noise Level 12 dB max. Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 |
|
|
| DVB-T Tuner |
Input frequency: 51~858Hz, loop through function Support MCPC/SCPC (1-45MS/s) Input Connector: IEC169-24 Female Input Impedance: 75 Signal Level: -65~-25dBm Demodulation COFDM |
|
|
| DVB-C Tuner |
Symbol Rate 2 ~ 45 MS/s Input Frequency Range 48 ~ 862 MHz Input Power Level -13 ~ +15 dBmV Input impedance 75Ω IF output frequency 36.15 MHz IF output level 1.0 Vp-p (1KΩ load) IF wideband 8 MHz Input Signal Terminal IEC |
|
|
| Video decoder |
Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4:3 / 16:9 Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart) Letterbox precolating for 4:3 TV-Device |
|
|
| Audio decoder |
Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz |
|
|
| Output analog |
Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB |
|
|
| Output digital |
Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) |
|
|
| Video parameter |
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard |
|
|
| TV-Scart |
| Output: FBAS,RGB,S-VHS |
|
|
| Serielle Interface RS 232 |
Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware |
|
|
| Ethernet |
10/100 MBit compatible interface Function: Update of Firmware, Connect to PC |
|
|
| LNB Power and polarisation |
LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode |
|
|
| Count of active satellite position |
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control |
|
|
| Power consumption |
| < 10W / 12V |
|
|
| Input voltage |
| DC12V, alternating acurrent +/- 15% |
|
|
| Extern power supply |
Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 1A |
|
|
| Physical specification |
Ambient Temperature +15°C...+35°C Humidity < 80% |