Metal shut up network

Easy to shut up fast network (also known as template network free splited) is made of a hot dip zinc plate, according to the BSEN 10142 1991 Fe P03GI + FeP02GI Z275 . the mesh and the U-section is with high-tech computer automated cutting machines and suppression . the board has made the contact surface as a whole with an exceptionally strong anti-tension. Fast network is easy to shut up as expendable for a fixed template. When pouring concrete in the back of the template, the mesh on the angle of the chip is embedded in concrete, and the nearby block casting is connected to the mechanical wedge. The joints are subject to strict quality control. And the bonding and shear strength of the area after good deal with the rough cut suture comparable. The features of easy to heal faster network are plenty , as follows

1. Good mechanical properties, the pressure on the small side under pressure equivalent to the general template of 60%,which can reduces the amount of templates supporting keel of 40%.
2. The direct observation of the process of casting itself as a result of the special mesh, and engineering castable can monitor from the naked eye.Thus it can reduce the porosity and the emergence of cellular the risks.
3. Light weight, convenient transportation and installation , quickly to install, easily to transport with only one-tenth of the weight of ordinary steel stereotypes
4.  Optimization technology can inncrease the shear interface ,when the mortar is pouring through the hole mesh and penetrates the interface,then it froms a very good coarse-grained interface.
5. It is easily to wear and tendons in a row banding reinforced because that the porous nature of the network can shut up over the use of special grid. A little effort can be reinforced through the use of the following 12mm. The slightly larger diameter can be cut steel mesh and be reinforced across the board after the position will be back.It is easy to heal faster and can be installed on the network which also be reinforced before the banding, and then through the mesh piercing installed.
6. It is adapt to sub-cast concrete, construction of permanent template of civilization,and don’t need to build or Chaimo joints and can be bonded to prepare for the next concrete pouring, the simplified interface the preparatory work
7. Eassily to cut .