JC-3-2500 computer controlled GRP pipe winding prodcution line

Main componets and technical parameters:
I. Computer controlled mortar adding and winding machine:
1. Range of winding diameter: DN200-2500mm；
2. Maximum winding length: L=12000mm；
3. Gross power: 29.13 KW; the power of main-shaft electric motor is 15KW; the power of running small-trolley is 4 KW;
Computer controlled shaft speed is 0-1500 circles/ min (stepless speed regulating); and the running small trolley is also stepless speed regulated;
4. Winding angle: 45°- 90°；
5. Diameter of main-shaft: Φ80mm；
6. Maximum twisting moment: 5354N?M；
7. Speed ratio: minimum 23;
8. One-time sand filling quantity: 0.5M3；0.65Kg/min；
9.Yarn drawing speed:
when winding pipe of 1 meter diameter at winding angle of 60° on main shaft I, yarn drawing speed is 0-120 meter/min, the maximum drawing speed is 120-meter/min;
when winding pipe of 2 meter diameter at winding angle of 60° on main shaft II , yarn drawing speed is 0-120 meter/min, the maximum drawing speed is 120-meter/min;
when winding pipe of 50 mm diameter at winding angle of 60°the yarn drawing speed is 0-60 meter/min
10. Production capacity: 300-800Kg/h；
11. External dimension: (length×width×height) 18000×4200×4800（mm）

II. finishing machine:
1. Diameter of finished FRP pipe: DN200-2,500mm；
2. Length of finished FRP pipe: L=12,000mm；
3. Gross power: 10.7KW
4. External dimension: 16460×2600×2500mm

III. Lining machine:
1. Gross power: 12.13KW(including gear pump, stirring machine, resin pump)
2. External dimension: 16000×4000mm

IV. Demoulding machine:
1.Diameter of FRP pipe to be demould : DN200-2500mm
2. Pushing force of hoisting machine: 40-120T
3. Gross power: 18KW
4. External dimension: 32500×4000×2400mm

V. Curing station: (4sets)
1. Gross power: 64KW
2. Scope of application: φ2500×12000（mm）

VI. Showering system:
1. Mechanical stirring machine volume: 1M3
2. Power: 12KW
3. Resin pump: 25Kg/min