Phone Jack-210B

Key Specifications/Special Features:

• Electrical characteristics:
• Rated power: DC 12V, 1A
• Contact resistance: measurement shall be made at with small current 1,000Hz (1A Max.)
• Insulation resistance: a voltage of 500V DC shall be applied for 1 minute after which measurement shall be made
• Dielectric strength: 500V AC (50 to 60Hz) for 1 minute, trip current: 2mA
• Endurance characteristics:
• Soldering heat test: the terminal for a printed circuit board:
• Temperature of solder: 260 +/-℃
• Dip time: 5 +/-1 seconds
• The terminal for a lead wire:
• Temperature of solder: 350 +/-10 deg.
• Dip time: 3 +/-1 seconds
• Cold: the jack shall be stored for 96 hours at a temperature of -25 +/-3 deg. immediately after which measurement shall be made
• Dry heat: the jack shall be stored for 96 hours at a temperature of 70 +/-2 deg. immediately after which measurement shall be made
• Contact resistance: 50m Ohms Max.
• Insulation resistance: 50m Ohms Min.
• Contact pressure: 0.5N (50gf) Min.
• Insertion force: 3 to 30N (0.3 to 3.0Kgf)
• Withdrawal force: 3 to 30N (0.3 to 3.0Kgf)
• Phone Jack, with Maximum Contact Resistance of 50m Ohms

Payment Details:

• Tact Switch
• Phone Jack-326A