The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. The system can be set delayed-arm. When a signal is detected by detectors, the detectors will send alarm signal to host immediately, then the host will dial 6 preset telephone/mobile phone numbers automatically. In addition, users can dial the host and set in arm/disarm mode by any phone.
Main Function:
1.With wavecome double frequency GSM module
2.8 wireless guarding zones (1 wireless SOS zone, 1 wireless fire alarm zone, and the other 6 wireless zones can be defined by user), 1 external power failure alarm zone.
3.Can set 6 mobile phone/telephone numbers for auto-dialing alarm.
4.The host automatically stores system status, while its power is off.
5.Can monitor the alarm site and report the alarm zones.
6.Remote arm/disarm
7.You can increase/decrease detectors.
8.Can program the alarm host by wireless keyboard or phone.
9.With voice reminder while alarm host is working.
10.With standby rechargeable battery and support dialogue.
11.Wireless signal transmission, easy installation, and can not afraid of cutting line.
12.Connected with the alarm center through GSM network
Specification:
1.GSM
GSM network frequency: 900/1800MHz or 850/1900MHz
Consumption: 1W(while sending message)
Support three target phone numbers
2.LED
Eight LEDs
3.External power failure alarm
Start-time: less than 1s
4.Alarm response time
Less than 10s (GSM in normality)
5.Power
Voltage: AC110V-220V, 50Hz or 60Hz
Backup battery: DC 8.4V
Backup battery working hours: more than 8 Hours
6.Working conditions
Operating temperature: －10℃～＋55℃
Humidity: 20% to 95%
Packing List:
1.One Alarm Host(Main Unit)
2.One Wireless PIR Sensor
3.One Magnetic Door/Window Contact
4.Two Remote Controllers
5.One Wireless Keyboard
6.One Siren
7.One AC adapter
8.One English Manual
| Post Date: | 6/8/2009 |
| Expiry Date: | 6/3/2010 |
| Other Price Terms: | T/T,Western Union,PayPal |