ACM608C Anesthesia Machine Workstation

A. Ventilator ?Ventilation mode：IPPV SIPPV SIMV CPAP SIGH Respiratory rate：6bpm-60bpm I/E Ratio：1:0.5、1:1 、1:1.5、1:2、1:3 Tidal Volume：80mL-1200mL,Display Tidal Volume and Respiratory Rate for Manual Mode (Ohmeda flow measuring system) Trigger sensitivity：0-2kPa (compared to PEEP) Colored LCD+high-luminance LED display Waveform：airway pressure waveform Monitoring parameters： Minute volume Respiratory rate Airway pressure (Ppeak Pmean PEEP) Alarms： Upper or Lower airway pressure limit Upper or Lower tidal volume limit Upper or Lower minute volume limit Apnea： Power supply failure Trend curve：full parameters 24-hour trend curve Communication port：RS-232 B. Vaporizer ?ACM608(C) is incorporated with two ACM108/105 vaporizers, one using enflurane as the anesthetic agent, the other using isoflurane The vaporizers can interlock Concentration control range：0.2-5%VOL The function of flow and temperature compensation Penlon Delta vaporizer imported from England can also be chosen. C. Anaesthesia machine ?Flowmeter： O2/N2O four-tube flowmeter Slim tube：0.1L/min-2L/min Wide tube：2.5L/min-10L/min Oxygen Failure Protection Device： Regulated the flow of the O2 and N2O by the device to assure the percentage of the O2 concentration is not lower than 25%. Safety performance： Alarm for oxygen supply failure Cut-off of the N2O APL valve Safety valve O2 flush：35L/min-75L/min Gas supplies： O2：0.3MPa-0.4Mpa N2O：0.3MPa-0.4MPa Insight Patient Monitor for monitoring patient?s physiological parameters Operating Information System for recording the operation process