I. Technical Parameters
Standard Input Voltage：AC12V 50--60Hz
Standard Power： MAX6.5W MIN1.7W
II. Operation Instruction
Use the pool or spa抯 existing light switch to control the effects.
Hentech LED Lamps are pre-programmed with an assortment of lighting effects. The Operation as following:
1. All lights can keep the current effect not less than 12 hours when they are under the same light switch
2.To realize the same effect at the beginning, you must operate as followings:
a. Make sure all lights are installed under the same light switch;.
b. Turn on and turn off the lamp to realize the same effect. The time which you turn off the lamp, isn抰 less than 1 second, no more than 9 seconds.
c. Turn off the power isn抰 less than 15 seconds, when you turn on again all lights at the last
effects.
d. When you turn on and turn off the lamp at11 times, all lights are under the Red/Blue party
mode. Transition quickly, cycling through the color spectrum. Reach to 22 times, all lights
will return the first mode 揂ll Colors?
III. Description of effects
1.All Colors
2.Green
3. Red is bright all the time, Blue transition
4.Blue
5.Green is bright all the time, Red transition
6.Red
7.Blue is bright all time, Green transition.
8.Color Change-Color transition from color to color, cycling through the color
spectrum.
9.Color Change-Color transition from color to color, cycling positive and
negative
10.All light flash
11.Red/Blue flash
12.Red bright, Blue/Green flash
13.Red flash
14.Blue/Green flash
15.Blue bright, Red/Green mix flash
16.Blue flash
17.Red/Green mix flash
18.Blue bright, Red/Green mix flash
19.Green Light flash
20.Multiple Colors flash
21.Party Mode_ Multiple Colors transition quickly, cycling through the color spectrum.