Home  >  Mechanical Parts & Fabrication Services  >  Motor Accessories  >  Motor Driver

  • 0.2-5A Single Axis TB6600 CNC Engraving Machine Stepper Motor Driver Controller  -Y122
0.2-5A Single Axis TB6600 CNC Engraving Machine Stepper Motor Driver Controller  -Y122

Roll over image to zoom in

0.2-5A Single Axis TB6600 CNC Engraving Machine Stepper Motor Driver Controller -Y122

ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

FOB Price: USD $ 14.02 / piece

Final price determined by purchase quantity. Get Latest Price >>

Supply Ability:

MOQ: 40 piece

In Stock

Delivery Time: 1 day delivery in China

0086 755 33941239 or sales-muse@ecvv.com

0086 755 33941239 or safebuy@ecvv.com

Guarantee: Supply by ECVV, ensure product quality and provide logistics service.

Payment: Bank transfer

Third party financial regulators will be involved in the transaction process.

Products related to this item

ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department

Main products:

Motor Controller, Motor Driver

  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department
  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department
  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department
  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department
  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department
  • ECVV Mechanical Parts & Fabrication Services Agent Purchasing Service Department

0086 755 33941239 or sales-muse@ecvv.com

0086 755 33941239 or safebuy@ecvv.com

Visit Showroom

  • Product Description
  • Parameter
  • Service Introduction
  • Guarantee

Motor Type Stepper Motor
Model Number 29111
Unit Type piece
Package Size 30cm x 20cm x 10cm (11.81in x 7.87in x 3.94in)
Package Weight 0.28kg (0.62lb.)

Motor Type Stepper Motor
Model Number 29111
Unit Type piece
Package Size 30cm x 20cm x 10cm (11.81in x 7.87in x 3.94in)
Package Weight 0.28kg (0.62lb.)

Description:

    • - HY-DIV268N-5A subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 48V power supply, suitable for drive
      Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.
      The main features
      - average current control, two-phase sinusoidal current drive output
      - DC 12 ~ 48V power supply, the internal integration of 12V and 5V regulator
      - optically isolated signal input / output
      - overvoltage, undervoltage, overcurrent, and white short-circuit protection

      - Input voltage DC 12 ~ 48V input
      - The input current of 1 to 5 amps, select the drive a stepper motor.
      - Output current of 0.2A ~ 5A
      - Temperature Operating Temperature -10 to 45 C; Storage temperature -40 C to 70 C
      - Humidity not condensing, not drops
      - Gas prohibit combustible gas and conductive dust
      - Weight 200 grams

      Control signal interface
      - Figure 1 is a wiring schematic of the drive
      - 1, the definition of control signals
      PUL +: step pulse signal is input side or the positive pulse signal input positive terminal
      PUL-: the negative input of the negative input pulse signal or a positive pulse signal
      DIR +: stepping direction signal input to the positive terminal or negative pulse signal input to the positive terminal
      DIR -: stepping direction signal input of the negative side or reverse step pulse signal input negative terminal
      EN +: offline can reset signal input side is
      EN-: offline can reset signal input negative terminal
      Offline enable signal is active, reset drive failure to prohibit any pulse, the output of the drive
      Power component is turned off, the motor holding torque.
      - Control signal connections
      - PC control signal can be high, also can be low effective. When active high, the control signal
      - The negative side together as a signal to active low, positive side of all control signals together as a signal common.
      - For example, open-collector and PNP output interface circuit diagram is as follows:


      Figure 2. Input interface circuit (common cathode connection)
      - Note: the VCC is 5V, R short;
      - VCC value of 12V, R 1K, more than 1/8W resistor;
      - VCC value of 24V, R 2K, more than 1/8W resistor;

      Function selection (DIP switch on the drive panel)
      - Set the motor per revolution steps
      The drive to set the number of steps per motor revolution is 200 (whole step), 400 (2 segments), 1600 (8 segments), 3200 steps (16 segments).
      The user can drive the front panel DIP switch SW3 is SW4 bit of the drive to set the number of steps (such as Table 1):
      Table 1
      - Set the output phase current
      - To drive torque stepper motor, the user can drive panel DIP switch
      - SW1, SW2 is to set the drive output phase current (RMS) unit amperes, the switch position
      - Corresponding to the output current, output current value corresponding different types of drive. Concrete are shown in Table 2.
      - Output Current (A
      Table 2
      Current setting


      - the semi-flow functionality
      - The semi-flow function is a step pulse 200ms, the driver output current is automatically reduced to the rated output current50%, used to prevent motor heating.
      Fourth, the power interface
      - 1, DC +, DC-: to connect the drive power
      - DC +: DC power level, power supply voltage DC 12 to 48V. The maximum current is 5A. The
      DC-: DC power supply negative level.
      2, A + A-B + B-: to connect the two-phase hybrid stepping motor
      Drive and two-phase hybrid stepper motor's connection with the four-wire system, the motor windings in parallel and series connection, and connection method, high-speed performance, but the drive current is large (for motor winding current of 1.73 times), Connected in series when the drive current is equal to the motor winding current.
      Five, the installation
      - Around to have 20mm of space, can not be placed next to the other heating equipment, to avoid dust, oil mist,
      Corrosive gases, high humidity is too big and strong vibration. +
      Figure 3.
      Six fault diagnosis
      1, the status light indicates
      RUN: green light in the normal work.
      ERR: red light, power, light, power indicator
    • Size: 10.5x8.5x3.3cm(approx)
    • Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
     

Package including:

  • Driver Controller x 1

 

aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()aeProduct.getSubject()

Service Process

Service Guarantee

  • Free purchase service fee

    Free purchase service fee: ECVV do not charge the Buyer a procurement Service Fee for purchasing this product.

  • ECVV Supply

    Ensure product quality and payment security.Ensure the date of delivery, ensure logistics to end destinations, provide custom clearance service.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a $ 100 deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.