2017 New 4CH 5V DC WIFI Light Switch Controlled by Phone APP, RF 433mhz Wireless Remote Control Switches For Garage Smart Home
1 X 4 Way 5V DC Switch
1 X RF 433mhz Transmitter(no battery)
1 Support WIFI network. (Attention: The switch module must keep connect with wifi service.)
2 Support 433mhz RF remote transmitter control.(Can learn most 433.92mhz transmitter, like chip 2260,2262,2264,1527. Allow 16 different transmitters to control )
3 Support three working modes: momentary, interlock and self-lock control.
4 Support Max 8 timing tasks for each added device.
5 Support status tracking, home appliances status timely feedback to your App.
1 Input voltage: DC 5V
2 Maximum load: 10A
3 Working temperature: 0-60 centigrade
4 Control method: WIFI +433mhz RF + Manual Button Control
5 Channels: 4 Way
6 Switch size: 69*90*30mm
7 Passive output, commonly used as a mechanical switch.
8 Remote Frequency:433mhz
9 Remote battery: A CR2025 button battery (not include)
How to connect phone with switch?
1 Make sure the switch and your phone under the same wifi service.
2 Download and install the software of “eWeLink” from APP store or Google play store.
3 Follow “eWeLink” instructions to register an account on it.
4 Log in your account of “eWeLink”.
5 Press any manual control button between S1-S4 for 5 seconds until you see the D3 light flash quickly, release it. Then add device on mobile phone by eWeLink APP according its introduction.
6 Now you can use your phone to control the switch under 2G/3G/4G signal.
How to learn 433mhz transmitter?
1 Press “learning button” until you see LED flash 1 time, release button, then CH1 learn.
2 Press “learning button” until you see LED flash 2 times, release button, then CH2 learn.
3 Press “learning button” until you see LED flash 3 times, release button, then CH3 learn.
4 Press “learning button” until you see LED flash 4 times, release button, then CH4 learn.
How to clear 433mhz signal?
Step 1: Keep pressing the "learning button" ;
Step 2: Supply power to switch;
Step 3: The LED light will flash 4 times slowly.
Step 4: Release the "learning button". OK.
How to set working mode?
1 Press “mode button” until you see D8 flash 1 time, release button, now it is momentary.
2 Press “mode button” until you see D8 flash 2 times, release button, now it is interlock.
3 Press “mode button” until you see D8 flash 3 times, release button, now it is self-lock.
What is the difference between working mode?
1 Momentary: Keep pressing remote button A, receiver CH1 ON. release button A, then receiver CH1 OFF
2 Interlock: Press remote button A, receiver CH1 ON, and receiver CH2, CH3,CH4 OFF.
3 Self-lock: Press remote button A , receiver CH1 ON. press button A again, then receiver CH1 OFF
1 Where can I use this switch?
First, I have a wireless router and WIFI service in my house;
Second, I install this switch in the range of wireless router WIFI signal.
Third, I connect my phone with the switch under wireless router WIFI service.
Then you can go anywhere to control it now.
2 Where can I download the APP?
APP store and Google Play store---- eWeLink
3 Can I install this switch in my car?
Yes, but I have to install a wireless router and have WIFI service in the car, then it is Ok.
4 How many people can control my WIFI switch?
I can share this switch to as many people as I can.
1. All the parcels will be sent via Aliexpress official shipping method, and they will be all traceable.
2. After parcel sent out, it will become uncontrollable. We will appreciate your patience during the delivery period. Estimate delivery time is 20~45 days for most of the countries (except for Brazil)
Note 1: We are not responsible for any taxes or VAT on the customs of buyer's country.
Note 2: If in 50 days you don’t receive the parcel, please contact us. We will submit a search with the shipping agent.
If during 60 days (90 days for Brazil) you don’t receive the parcel, we will issue full refund to you.
1 All item Comes with Basic 3 Month Sellers Warranty,if item defective in 3 Month,We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
2 If item Defective after 3 Month,Buyers can still send it back,We will contact suppliers or manufacturer for Warranty.Buyers Need pay the Shipping fee For resend the replaced item.
3 If you want to exchange the items received, you must contact us within 3 days of the receipt of your order. And you should pay the additional shipping fees incurred and the items returned should be kept in their original status.
There are many payment methods available,Terms of payment allowed to be made by Escrow, Visa, MasterCard, Moneybookers, Western Union, Bank Transfer and so on.
You can choose a method which is the most convenient for you. To protect your interests, your payment will be temporarily held by Aliexpress, and will not be released to us until you receive your order and are satisfied with it.
if you do not know how to pay the money,
please see this link:http://help.aliexpress.com/payment_method.html
1 Customer's satifaction is very important for us, if you are satified with our products and service, please take time to leave us a positive feedback, your encouragement will keep us moving forward and constantly improving our service.
2 If you are not satisfied with our service, please let us know. Trust us, we will solve your unhappy through friendly negotiations.