Traxxas E-Maxx Mamba Brushless Edition 4WD Monster Truck

Specifications

NEW 1:10 Traxxas E-Maxx Mamba Brushless Edition 4WD Monster Truck

QUICK FEATURES ON E-MAXX BRUSHLESS EDITION (#3908)
- NEW TQ 2.4GHz Transmitter and Receiver with Traxxas Link™
- Castle Creations Mamba Monster Brushless System
- Up to 25.2 Volts of Massive Brushless Power
- Traxxas Power Cell Batteries Included
- Heavy-Duty 17mm Hex Hubs
- New body design and graphics
- Aggressive 6.3” Maxx-Sized tires
- Black-Chrome 3.8” Split-Spoke wheels
- Traxxas TQ 2.4GHz Radio System
- Four-Channel micro receiver
- Top Speed: 50+mph out of the box, 65+mph all-out!

Includes two Traxxas Power Cell Battery packs (NiMH, 7-C Stick)
Traxxas High-Current Battery Connectors
TQ 2.4GHz High Output transmitter with Traxxas Link™
Automatically stores and loads settings for up to 20 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required.
        Multi-Function knob
        Adjustable steering and throttle percentage (dual rates)
        Adjustable steering and throttle sensitivity (exponential)
        Adjustable steering and throttle end points
        High 13ms frame rate and near-zero latency for responsive control
        5-channel micro receiver with dual channel-1 inputs
    Adjustable four-position wheelie bar
    Castle Creations Mamba Monster ESC
        6.5mm gold-plated connectors
        Integrated cooling fan
        Heavy-duty construction
    Castle Creations Mamba Monster 2200KV Motor
        Machined heatsink can
        5mm rotor shaft
    Brushless transmission with metal center idler gear
    Heavy-duty 17mm splined aluminum hex hubs and wheel nuts
    Tunable sealed differentials in Maxx® differential housings
        Backward compatible to all Maxx models
        Differential uses Revo®-Spec gears and components
    Revo®-Spec front, rear, and center driveshafts
    New heavy-duty Brushless Ready™ transmission
        Over two-times stronger than original E-Maxx transmission
        Steel idler gear
        Optional accessory two-speed adjustable ratio gear sets
    Close ratio or wide ratio for super-low first gear
        Available accessory single motor mount and gear cover
    Revo®-Spec Torque-Control™ slipper clutch
    Quick release, battery hold down straps
        Reversible to accept stick packs and side-by-side packs
        Available accessory battery strap for oversized battery packs (sold separately)
    Long wheelbase, low center-of-gravity chassis increases stability
        Extended by 30mm
        Accepts 6-cell or 7-cell flat battery packs and LiPo packs of similar size
        Batteries sit lower in the chassis for lower CG
        Lower skid plate protects the center driveline while allowing quick access to the transmission
    Water-proof high-torque dual steering servos (#2075)
    Four-channel 2.4GHz micro receiver
        Two channel-one outputs for dual steering servos (no Y-harness required)
    Precision hex hardware throughout
    6.3" diameter Maxx tires pre-glued on black-chrome Split-Spoke wheels
    Two-piece gear cover makes it easy to access and change gearing
        Requires removal of only one screw for access
    Sealed pivot balls and front/rear outer driveshafts
    Eight fully-adjustable, coil-over Ultra Shocks
    Integrated dual servo bellcrank and servo saver
    Watertight sealed receiver box
    100% captured steering and toe linkage
        Double-shear components capture and secure all rod ends for unmatched durability
        Rear toe-links are captured by a thick tie-bar for double-shear strength
    Updated shock towers and adjustable body mounts
    Gray composite components
        Chassis, skid plates, bulkheads, shock bodies, spur gear cover
    Precision rubber-sealed ball bearings
    Blue-anodized aluminum antenna crimp nut
    Four-position wheelie bar included
    Fully painted, trimmed, and decaled ProGraphix® body

E-MAXX BRUSHLESS EDITION (#3908) SPECS
Length:    22.5 inches (571mm)
Front Track: 16.5 inches (419mm)
Rear Track: 16.5 inches (419mm)
Center Ground Clearance: 4 inches (101mm)
Weight:    154oz (4.36kg)
Height (overall): 9.5 inches (241mm)
Wheelbase: 13.2 inches (335mm)
Front Shock Length: XXLong
Rear Shock Length: XXLong
Front Tires (pre-glued): Maxx® (6.3" x 3.8")
Rear Tires (pre-glued):    Maxx® (6.3" x 3.8")
Front Wheels: 3.8" Split-Spoke (black chrome)
Rear Wheels: 3.8" Split-Spoke (black chrome)
Speed Control Type: Castle Creations Mamba Monster
Forward/Reverse/Brake
Motor (electric): Castle Creations Mamba
Monster 2200KV
Transmission: Single-Speed (2nd gear only)
Overall Drive Ratio: 20.88 (stock, out-of-box)
Differential Type: Bevel Gear, Sealed, Limited Slip
Gear Pitch: 32-Pitch
Chassis Structure/Material: Molded Composite Nylon Tub
Brake Type: Electronic
Drive System: Shaft-Driven 4WD
Steering: Bellcrank
Radio System: TQ™ 2.4GHz High Output with Traxxas Link™
Top Speed: 35+mph (65+mph w/ two 3S LiPo Batteries)
Skill Level: 2
Included Batteries: Two Traxxas Power Cell Batteries (NiMH, 7-C Stick)
Required Batteries & Charger: 4 "AA" (transmitter)
7.2V or 8.4V Charger (6 or 7 cell)

CASTLE CREATIONS MAMBA MONSTER ESC SPECS
Input voltage (cells):         18 NiCad/NiMH 6s LiPo (max: 25.2 volts)
Case Size:         2.2”W x 1.9”D x 1.4”H
Weight:         4.27 ounces (121 grams)
On-Resistance­ (@Trans)–FWD/REV:         0.0003 ? per phase
Reverse Delay:         Yes, with lockout