Magnetic Separator for Iron Ore/Rare Earth Magnetic Seperator

Specifications

Magnetic Separator Mining/Drum Permanent Magnetic Ore Separator Overview to Drum Permanent Magnetic Ore Separator/Magnetic Separator Mining:

Magnetic separation is generally a low cost method of recovery, unless high intensity separators are required. the electro-magnetic high intensity separators that produce 20,000 gauss; the rare earth magnetic separators are relatively inexpensive and can produce magnetic fields around 6,000 gauss. To different kinds of mineral ores, the application of magnetic separation machine is quite different. Magnetic separator is mainly used in wet separating of the fine minerals with strong ferromagnetism. the wet-type drum permanent magnetic separator is mainly suitable for wet separating of the following ores with the sizes less than 3mm, which are magnetite, magnetic pyrite, baking ore, and limonite and so on.

1. Permanent magnetic drum cylinder wear, if you find gum paste fall off after severe wear, should be processed in a timely manner or be linked with glue.

2. Cabinets with or without iron debris falling into, and removed immediately upon discovery.

3. Motor, CVT and over-heating of the permanent magnetic drum bearing, bearing temperature rise shall not exceed 35 c, the maximum must not exceed 65 c.Black-belt tensioning and their degree of tension to be appropriate.

4. the wear of the belt, found to be badly worn, should choose the length of the belt unit replaced.

5. All lubricating points of Drum Permanent Magnetic Ore Separator/Magnetic Separator Mining have sufficient lubricating grease, CVT oil level is normal, if a deficiency is found, it should be promptly added.