Ecvv Trade
Shen Zhen Shun Feng Jin Electronic LTD.,CO

China Manufacturer with main products: calipers, micrometer, dial gauge, depth gauge

Home  >Products Catalog > Digital Thickness Gauge (SFJ 0-12.7MM)

Digital Thickness Gauge (SFJ 0-12.7MM)

FOB Price: 350.00 - 440.00 RMB/Pair
Payment Terms: L/C, T/T(Bank Transfer)
In Stock

Related products from verified members

Place of Origin: Guangdong in China


Resolution: centesimal: 0.01mm/0.0005",

millesimal: 0. 001/0.00005".  
Measuring Range: 0~12. 7mm/0.5", 0~25.4mm/1"
Power: One sliver oxide battery (SR44) with work voltage 1.5V.
Operating temperature: 0℃~40℃
Storage temperature: -20℃~70℃
Relative humidity: ≤80%
1. Down measuring surface  
2. Up measuring surface
3. Bracket            4. LCD display  
5. Lever                 6. Zero-setting  
7. On/off switch   8. MM/IN switch
9. Battery compartment
10. Data output interface
1. Zero setting at any position;
2. ON/OFF switch ;
3. Metric/Inch system interchange at any position;
4. With data output interface.
1. Push down the LEVER and clean the measuring surfaces with a soft cloth.
2. Press the ON/OFF switch. The 0. 00mm or 0. 000mm display appears.
3. When the DOWN MEASURING SURFACE close to the UP MEASURING SURFACE , you should press the ZERO SETTING to let the display show 0. 00 or 0. 000.  
4. Push down the LEVER and make the workpiece between the UP and DOWN MEASURING SURFACE; loose the LEVER then read the display data.
5. Press MM/IN to interchange the measuring unit.
The method of replacing battery 
Remove the battery compartment and replace one SR44 battery with its positive (+) side facing upward.

1. Avoid shocks, impact, dropping etc., otherwise it will damage the appearance and precision.
2. Keep gauge clean, prevent liquid from getting into inside.
3. Do not remove output connector lid without using output interface. Output end should never be connected with metal. Doing so could damage your gauge.
4. Do not connect any part of gauge with voltage;   otherwise it will damage the circuit.
5. Must take out the battery if not in use for a long time.
Possible Situation
All digits appear simultaneously and change rapidly
Battery power low
Remove battery compartment lid and replace battery
The display does not work (only when changing battery)
Circuit accidental pause caused by poor voltage when fixing battery
Remove battery and replace it after 30 seconds
Reading error for full length is ≤0. 1mm
Dirt has damaged/covered sensor
Remove cover and slider assembly. Apply a small layer of petrol to avoid dirt build-up
Nothing appears on the LCD
Battery has poor contact. Battery voltage is under 1. 1v
Keep good contact for battery or replace the battery

Service Process

Service Guarantee

  • Free Service Charge

    ECVV doesn't charge any service fee to Buyers for buying this product.

  • ECVV Supply

    ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.

More products from other suppliers

Compound Gauge    
FOB Price: 1.00-2.00 USD/ningbo
Ultrasonic Thickness Gauge MT200    
FOB Price: 428.00-550.00 USD/Piece
Min Order: 1 Piece
FOB Price: 100.00-350.00 USD/Piece
Min Order: 1 Piece
IEC60061 B22 Lamp Cap Go No Go Gauge    

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join Facebook Group