Steel Grating

Specifications

The main steel grating manufacturer in China , our strength, safety, and no maintenance design make QIAOSHI Steel Grating’s grating and fast fitting accessories a practical and economical answer to many applications. 
 

Qiaoshi Grating  manufacture and fit a variety of products for commercial buildings, the automotive and assembly industries, factories, oil installations, generating plants, and food processing areas, in fact anywhere ease of movement and safety is required for staff and merchandise. Because of its robust design and spanning abilities, steel grating is extremely strong and safe for the support of structures such as mezzanine floors and elevated walkways.

Steel grating also has many uses in the freezing industry, as hygienic flooring for livestock pens and sheds, and for small applications such as drain covers. Steel grating has 87% open area which makes for easy, quick wash downs and fast natural drying.

PRODUCT SERIES

1. Forge welded, Steel Grating is available in bar sizes from 20mm to 50 mm. Press-locked Steel Grating incorporates tight fitting, slotted bearings and twisted cross bars locked together under extreme pressure creating a strong, rigid panel with a level surface and easy maintenance.

2. Serrated Grating is available with most standard load bearing bars. The serrations are formed by placing a series of notches along the upper edge of the load bar, thus enhancing the non-slip characteristics of the grating. When Serrated Grating is required it must be nominated (e.g., series 351/1 serrated).

QIAOSHI Grating . Serrated Grating is available in all bar sizes from 25mm to 50mm with the twist bar located flush with the bottom edge of the serrations, providing the best non slip grating on the native market.

PRODUCT SPECIFICATION

CONSTRUCTION

Steel Grating is made from mild steel or aluminium formed by a special mechanically press-locked process that eliminates any welding therefore avoiding any weld stress problems that may occur with other designs.

The load bearing bars can be 20mm, 25mm, 32mm, 40mm and 50mm (x 3mm/5mm thick).

They are spaced 19mm, 30mm or 40mm apart with twisted cross support bars 100mm apart depending on load bearing requirements.

Safe Loads and Deflections for Load bars
 
Steel Grating: series 1--- 30 mm bar centres
Steel Grating: series 2 ---40 mm bar centres
 
 
If unsure as to the load bearing characteristics required consultation

should be made with an engineer.

FINISH

Steel Grating is either natural colour or hot dipped galvanised to give a hygienic and clean, maintenance-free and bright finish. Perfect for use in corrosive atmospheres or coastal applications.

CUSTOM MADE

Steel Grating is manufactured in sheets 6m x 0.993m but can be cut and made to your individual dimensions or your designers’ requirements. It can be made to fit around any object.

Because of its robust design and spanning abilities, Steel Grating is extremely strong and safe for the supportive structures on deckings, mezzanine floors and elevated walkways.