Shanghai Meisongbei Electronics Co., Ltd.| Sourcing Services
Shanghai Meisongbei Electronics Co., Ltd.

China Manufacturer with main products: 1. SMD Power Inductor (Shield & Unshield). 2. Common Mode Choke. 3. Toroidal Coil Inductor. 4. Encapsulated PCB Mount Transformer

Home  >Products Catalog > Chip Inductor

Chip Inductor

  • ECVV Safebuy Services

    According to the requirements of buyers, ECVV.com will purchase the cost-effective Chinese products for you from the well-chosen suppliers database which was accumulated in the past 10 years.Learn More>>

  • Safebuy Service Guarantee

    Provide financial security for multinational purchaser; Determine delivery time and acceptance product according to the purchasing requirements; Arrange Chinese export declarations and international logistics; Provide unified delivery of products from different suppliers.

Specifications

Chip beads have a high current with a high level of resistance
Chip inductor are small profile with low resistance
High-current chip inductor
Wire wound chip inductor
Ceramic chip inductor
Ferrite chip inductor
Molding chip inductor
Multilayer chip inductor
Common mode chip choke
Wire wound chip power inductor
Low profile power inductor
Low DCR SMD power inductor
Large-current SMD power inductor
SMD magnetically shield power inductor
Shielded SMD power chip inductor
Magnetic shielded surface mount inductor with high current rating
Low profile and shielded very effective in space-conscious applications
Low resistance to deep power loss minimum
Operating temperature: -40 to 105 degree Celsius (contain heating coil)
Appearance inspection: no external defect by visual inspection
Terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions
Terminal should not peeled off
Heat endurance of reflow soldering: 240
Insulating resistance: over 100M ohms at 100V DC between wire and core
Dielectric strength: no dielectric breakdown at 100V DC for one minute between wire and core
Temperature characteristic: inductance coefficient (0 to 2,000) x 10-6/(-25 to +80 degree Celsius) inductance deviation within ±5.0%, after 96 hours
Humidity characteristic: in 90 to 95% relative humidity at 40 ±2 and one hour drying under normal condition
Inductance deviation within ±5.0% after vibration for one hour
Vibration resistance: in each of three orientations at sweep vibration (10-55-10Hz) with 1.5mmp-p amplitude

Surface-mount wire-wound Ceramic chip inductors
Surface-mount wound molded chip inductors
Surface-mount multi-layer chip array beads

Inductors from this supplier

Ellipse Inductor Coil Air Copper Coil Magnetic Coi Cores    
FOB Price: 0.40-1.00 USD/Piece
Min Order: 1000 Pieces
SMD CDRH103R-101M Power Inductor    
FOB Price: 0.12 USD/Piece
Min Order: 1000 Pieces
RX27 Series 5w 10w Wirewound Cement Ceramic Resistor for Electronic Equipment    
FOB Price: 0.03 USD/Piece
Min Order: 1000 Pieces
PZ-TLC3235 Series Common mode toroidal chokes    
FOB Price: 2.20-2.80 USD/Plant
Min Order: 1,000 Plants
Differential mode inductor cores    
FOB Price:
Min Order: 100 Pieces

More products from other suppliers

CHIP INDUCTOR (0805 1206) 100uH    
FOB Price: 0.15-0.90 USD/Piece
Min Order: 1,000 Pieces
Molded Power Inductor    
FOB Price: 0.01-0.20 USD/Piece
Min Order: 1 Piece
INDUCTOR    
PZ-TLC3235 Series Common mode toroidal chokes    
FOB Price: 2.20-2.80 USD/Plant
Min Order: 1,000 Plants

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join Facebook Group