Tai'an Wuzhou Fuel Pumps And Nozzles Co.,Ltd.| Manufacturer
Tai'an Wuzhou Fuel Pumps And Nozzles Co.,Ltd.

China Manufacturer with main products: Diesel Fuel Injection Pump Test Bench, Common Rail Injector Test Bench, EDC Electronic Tester, Nozzle Tester

Home  >Products Catalog > Common Rail Injectors Test Bench

Common Rail Injectors Test Bench

Supply Ability: 1,000 Set/Sets per Week
Payment Terms: L/C, T/T(Bank Transfer)
Packaging Details: wooden carton

Specifications

Common Rail Test bench mainly include PQ1000, P2000 CRDIs and CR2000, CR200A ,CRS200, etc. products which are not only can test different kinds of common rail injectors, it’s up to test six cylinders together, but also can test common rail pumps, Bosch CP1-k, CP1-H, CP2, CP3, Delphi, Denso, Siemens etc., advanced technology, catches the steps of international development, appropriate price, meet different customers demands
PQ1000 COMMON RAIL INJECTOR TEST BENCH
1. To test if the CR injector is still function, to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to continuous is injection mode. The CR injectors in normal condition, if it is capable to inject fuel under the driving signals by the tester.
2. To test injector spray atomization, to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to single injection mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.
3. Checking the injection return oil and injection oil.
4. with ultrasonic cleaning tester to clean the nozzle.

Main Voltage(Vac)
220V
Main Frequency(Hz)
50/60
Max Filling Volume per Tank(lit./gal)
2
Input System pressure(bar/psi)
0-10/0-145
System Build-up Pressure(bar/psi)
0-1800bar/0-26100 psi

It is used to test the common rail injector, and it also can clean the common rail injector by Ultrasonic Cleaning Instrument.
Technical data:      
1. High pressure 0-1800bar
2. Check the injector starting pressure
3. Assessment of the injector spray fog quality
4. Inspection of the injector spray oil range
5. Check of the injector seal and angel
6. Check of the injector oil flow
7. The parameter of common rail injector (fuel spray counts, frequency, pulse width, Voltage) can be set willfully.
 
 
 
PQ2000 Common Rail Injectors Test Bench
u      Functions:
The function of a Tester for CR injectors is to provide desired signal to drive the solenoid in the CR injector being tested. Testers of two models have been designed one for driving single CR injector.
The CR injector tester is applied for CR system repair in three aspects:
(1) To test if the CR injector is still function
To connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to continuous injection mode. The CR injector is in normal condition, if it is capable to inject fuel under the driving signals by the tester.
(2) To test injector spray atomization, to connect a CR injector to a high pressure fuel source by a high pressure fuel line and to the CR tester by harness. The tester is set to single injection mode to allow observing the nozzle spray pattern to judge if the nozzle is normal or orifice plugged.
(3) Checking the Injectors return oil and injection oil.
l        Design Features
u        Modulated driving signal to ensure the safety of the solenoid of the CR injector
u        The frequency and the pulse width of the driving signal are user adjustable.
u        Short circuit protection for the output circuitry of the solenoid driving signal
 
n       CR2000 Common Rail Injectors and Pumps Tester
 
CR2000 COMMON RAIL SYSTEM TESTER, INCLUDE ABOVE THREE SIMULATORS, PUMP-CR2000, EM-CR2000, PE-CR2000.
l       Functions
1. It can be installed on the any model of diesel pump test bench.
2. The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump being tested.
R2000 common rail Tester can test following pumps:
 
BOSCH CP1-H, BOSCH CP1-K,BOSCH CP2 , BOSCH CP3,
DELPHI, 
DENSO HP2 AND HP3.
SIEMENS 
It can drive up to 6 common rail injectors in one time.
 
u      Design Features
l          Modulated driving signal to ensure the safety of the solenoid of the CR pump
l          Adjustable duty cycle for the driving signal
l          Short circuit protection for the output circuitry of the solenoid driving signal
l          Measure and LCD display rail pressure
l          The tester model for Denso U2 pump inputs and processes the signal from pump speed sensor on the U2 pump, and ensure the driving signal synchronous with pump speed.
 
CRS200 COMMON RAIL SYSTEM TESTER
The CRS200 common rail system tester is the testing equipment specializing designed to test Common rail system. It adopts ARM7 core high-speed 32-bits microcontrollers as master controller, responsible for collecting the signal and control; it uses MSC-51 compatible microcontroller and dot matrix 5.7-inch LCD screen, to realize the exchange between man and machine, to finish the common rail testing system various functions testing
 
System Using Scope:
 
 The system is suitable for test all kinds of BOSCH, DENSO, DELPHI common rail system fuel pumps, rail and injectors. Such as CP1, CP2, CP3, HP3 etc…series of pumps and injectors. Using this equipment, it should install it on the diesel pump test bench; put the required common rail pumps or injectors installed on the specified location, connect the power to let the machine work, and to test/calibrate it according to the related instructions.
 
Main Technical parameters:
 
1)Injection open pressure
Control scope: 24V, 80V, 150V
Control accuracy: stage regulator:
2)injection open frequency:
Control range: 0-1000Hz
Control accuracy: 1HZ
3) Injection open hold time
Control range: 0-65535us
Control Accuracy: 1us
4)      Delivery counts
Control Range 0-1000
Control accuracy: 1 times
5) Pump Model: CP1, CP2, CP3, HP0
6.) Fuel pressure Control
Control Range: 0-200MPA
Control accuracy: 1Mpa
Control way: PID
7) Power: 220V
 
8) Work Temperature: 0-40 ℃
9) Relative Humidity: 20 ∽ 90% RH
 

Common Rail Injectors Test Bench from this supplier

High Pressure Diesel Common Rail Injector Tester    
FOB Price: 5600.00 USD/Set
Min Order: 1 Set
Conventional Diesel Injection Tester for Automative Maintenance    
FOB Price: 2,000.00-5,000.00 USD/Set
Min Order: 1 Set
Genuine Parts Engine Wholesale Price Bosch Diesel Injector Nozzle Tester    
FOB Price: 2,000.00-5,000.00 USD/Set
Min Order: 1 Set
Common Rail Injection Calibrating Machine    
FOB Price: 2,000.00-5,000.00 USD/Set
Min Order: 1 Set
Testing Equipment Common Rail Injection Test Bench Diesel    
FOB Price: 2,000.00-5,000.00 USD/Set
Min Order: 1 Set

More products from other suppliers

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join Facebook Group