United Arab Emirates
Saudi Arabia
Maroc
Egypt
Turkey
Vietnam
United States
BAOHUA HEAVY INDUSTRY CORP., LIMITED
China Manufacturer with main products: Excavator, Road Roller, Crane, Loader, Crusher, Mining Machine, Rotary Drilling Rig, Bulldozer |
Related products from verified members
| Place of Origin: | Beijing in China |
|---|
Specifications
The crane adopts polygon-section boom(Patent)which makes the stress distributed more evenly, the load bearing condition improved, the deadweight reduced, and the load carrying capacity of boom improved.
The boom adopts two-section independent telescoping mechanism (Patent) which greatly improves the lifting performance of the middle-long boom.
The crane adopts double slewing mechanism and closed control circuit(Patent)which make gear drive continuously and smoothly. In addition, it has the advantages of good cushioning performance, high accuracy of motions, high utilization ratio of energy and low heat of system while the crane starts or brakes.
The crane adopts load sensor and electro-hydraulic proportional control system (Patent) which can improve the jogging performance of motions.
The electric system has the faulty self-diagnosis function, which can monitor the working state of electronic control system in the course of running crane. If the abnormal phenomena happen, it can find out faults by a certain way to calculate, start the corresponding fault running modules and then display the corresponding information on interface. In this way, the service man can find out the faults and do maintenance at once.
The crane adopts CAN-bus control technology which ensures the high reliability of data transfer.
The crane adopts limit load control technology which can ensure the engine power to be full used and prevent it from shutdown due to overload.
The crane adopts limit load control technology which can ensure the engine power to be full used and prevent it from shutdown due to overload.
The crane is equipped with a load moment limiter with multifunction which can ensure high safety, reliability and accuracy.
The crane adopts an operator's cab which can tilt 20°to broaden operator’s view.
The derricking mechanism adopts four modes, e.g. high speed, middle speed, low speed and jogging, to meet the requirements under different working conditions.
The driver’s cab adopts an advanced reversing rear display system which displays rear working area directly to make reversing much safer andeasier.
Parameter:
|
Item
|
Value
|
Remarks
|
||
|
Working performance specification
|
Max. rated total lifting capacity
|
130000 kg
|
|
|
|
Max. load torque of basic boom
|
4980 kN.m
|
when the working radius is 6m
|
||
|
Max. lifting height of basic boom
|
13 m
|
|
||
|
Max. lifting height of main boom
|
49.5 m
|
Deformation of boom is not taken into consideration.
The value in the bracket indicates the crane with extension boom.
|
||
|
Max. lifting height of fly jib
|
66m (73m)
|
|||
|
Working speed
|
Max. speed of single rope on main winch
|
115 m/min
|
The 4th layer of drum
|
|
|
Max. speed of single rope onauxiliary winch
|
115 m/min
|
The 4th layer of drum
|
||
|
Derricking time of boom
|
90 s
|
|
||
|
Telescopic time of boom
|
150 s
|
|
||
|
Slewing speed
|
0～1.5 r/min
|
|
||
|
Traveling specification
|
Max. traveling speed
|
72 km/h
|
|
|
|
Max. gradeability
|
40%
|
|
||
|
Min. turning circle diameter
|
24 m
|
|
||
|
Min. ground clearance
|
258 mm
|
|
||
|
Limits for exhaust pollutants and smoke
|
Comply with related standards
|
GB3847-2005
GB17691-2005
(StageⅢ)
|
||
|
Oil consumption per hundred kilometers
|
80 L
|
|
||
|
Mass specification
|
Deadweight of crane in traveling condition kg
|
70000(50195)
|
The value in the bracket indicates advertised specification.
|
|
|
Complete vehicle kerb mass
|
69805(50000)kg
|
The value in the bracket indicates advertised specification.
|
||
|
Front axle load
|
31000 kg
|
Including boom
|
||
|
Intermediate and rear axles load
|
39000kg
|
Including boom
|
||
|
Dimension specification
|
Overall dimensions(L×W×H)
|
14300×3100×3750mm
|
Advertised specification (excluding boom)
|
|
|
16165×3100×3818mm
|
Including boom
|
|||
|
Base on outriggers
|
7.04m
|
|
||
|
Distance between outriggers
|
8.5 m (full extended), 5.6 m (half extended)
|
|
||
|
Main boom length
|
13m～48m
|
|
||
|
Main boom angle
|
-2°～80°
|
|
||
|
Fly jib length
|
10m,17m
|
|
||
|
Extension boom + fly jib
|
7.5m, 24 m
|
Extension boom is available as options.
|
||
|
Offset angle of fly jib
|
0°, 15°, 30°
|
|
||
|
Chassis
|
Model
|
ZLJ5700
|
Feature No.:ZLJ5700H3
|
|
|
Class
|
II
|
|
||
|
Engine
|
Model
|
OM502LA
|
|
|
|
Rated power KW/r/min
|
390/1800
|
|
||
|
Max. output torque
|
2400/1080 N.m/r/min
|
|
||
|
Superstructure engine
|
Model
|
TAD721VE
|
Euro II Emission
|
|
|
Rated power
|
195/2300 KW/r/min
|
|
||
|
Max. output torque
|
905/1400～1800 N.m/r/min
|
|
||
Components & Parts:
1.
1.
|
New sliding design for bracing support, side hydraulic luck
|
|
Side hydraulic luck, avoiding heavy crash during the operation, ensures security.
|
|
Anti-slew steel wire
|
|
Longevity of service for the anti-slew steel wire, ensures the security of the lifting.
|
3.
|
Moment Limiter and Display
|
|
Automatic moment limiter has the function of self testing and alarming.
|
4.
|
Major boom head and slider
|
|
1, Hexagon major boom adopts low alloy and high strength structure steel
2, The slider with national patent, flexible operation, logical strength distribution. Strong lifting capability. |
5.
|
Hydraulic Motor
|
|
1, Supercharged inter-cooled engine, capable for working at place over 4500 meters altitude.
2, International dominant variable amplitude mechanism, to make the mast close or leave the machine in parallel. 3, Three section, foldable, box shape design mast, with outstanding intensity and strength. 4, The hydraulic system is efficient, energy saving, accurate on the ratio operation, load transmission, load sensitivity control. |
Service Guarantee
-
Free Service Charge
ECVV doesn't charge any service fee to Buyers for buying this product.
-
ECVV Supply
ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.
-
Product Quality Commitment
ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.
-
Deposit Service Commitments
In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.
After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.
truck crane from this supplier
Min Order: 1 Unit
FOB Price: 10000.00-100000.00 USD/Piece
Min Order: 1 Piece
Min Order: 1 Unit
More products from other suppliers
Min Order: 3 Pieces
Min Order: 10 Pieces
Maintenance truck crane Suppliers :
Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.
Learn More>> Start Safebuy OrderCommunicate with Supplier
Sourcing from ECVV
Contact Us
