LED Tube Lighting / T8 Tube Light / LED Tube Lamp For Waterproof

Specifications

• LED Tube Lighting / T8 Tube Light / LED Tube Lamp For Waterproof
  Specifications of T8 LED Tube Lighting:
  • • • • Input voltage: 24v
        • Power consumption: 12W
        • Power Supply: DC24V/350W
        • Size: L1000*H55mm
        • LED type: SMD5050 48pcs
        • Lumimous flux: 855 lm
        • Work frequency: 50 to 60HZ
        • Viewing angle: ≥ 160 degrees
        • Operating lifespan: 50,000 hours
        • Sheel Material: aluminium alloy+resist (UV)PC
        • Protect degree: IP66
        • Working temperature: -25-~+50 0C
        • Point luminance: 100(CD)
        • Colour depth: 8/12(bit)
        • Pixel pitch: 125mm(8p*/m)
        • Signal maximum : 512/680(px)
        • Power supply maximum: 10/15(M)
        • communication line: cat 5E

• LED fluorescent light
• Comes in aluminum alloy material with acrylic cover
• Built-in dedicated LED driver with PWM constant current supply to ensure longer operating lifespan and to minimize brightness deterioration due to overdriven, unlike many other designs where only normal rectifier and simple RC circuit is employed
• Any individual LED failure will not cause other LEDs in working condition to black out
• Direct plug-in replacement for conventional T8 fluorescent tube
• With electrical or magnetic ballast and starter
• Does not need such ballast/starter to operate and normally its performance should not be affected if left intact
• With HB LEDs and higher power factor value
• Recommended to bypass the magnetic ballast if there is negative impact on PF value or blinking
• Not recommended for fixtures with electronic ballast/starter due to much higher voltage
• Internal wiring of such fixture must be reconnected to have the electronic ballast/starter removed
• Available in 100 to 150V, 60Hz and 190 to 260V, 50Hz