CITIC IC Luoyang Heavy Machinery Co., Ltd.

China Manufacturer with main products: Heavy Machinery Parts, Shell and Head Liner, Grinding Mill, Mine Hoister, Girth Gear, Rotary Kiln, Casting and Forging, Gearbox

7th
Home  >Products Catalog > Rotary Kiln > Industrial Rotary Kiln- Self Return Soda Ash Steam Calciner

Industrial Rotary Kiln- Self Return Soda Ash Steam Calciner SafeBuy Supplier Member

FOB Price: 1,000,000.00 - 8,000,000.00 USD/Set
Supply Ability: 8 Set/Sets per Year
Shipping: As agreed in the contract
Payment Terms: L/C, T/T
In Stock
Export Markets: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia
Place of Origin: Henan in China
Packaging Details: Seawothy Packages

Specifications

Industrial Rotary Kiln- Self Return Soda Ash Steam Calciner
Application of Rotary Kiln:
Rotary kiln is generally used for the production of cement, lime, refractories, metakaolin, titanium dioxide, alumina, vermiculite and iron ore pellets, as a pyroprocessing device to raise the material to a high temperature (calcination) in a continuous process. They can also be used for roasting a wide variety of sulfide ores prior to metal extraction.
 
Working principle of the rotary kiln:
The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. The fuel for this may be gas, oil or pulverized coal.

Kiln construction:
The kilns are basically composed by the shell, the refractory lining, support tyres and rollers, drive gear and internal heat exchangers.
 
Kiln shell:
This is made from rolled mild steel plate, usually between 15 and 30 mm thick, welded to form a cylinder which may be up to 230 m in length and up to 6 m in diameter. This will be usually situated on a east/west axis to prevent eddy currents.
Upper limits on diameter are set by the tendency of the shell to deform under its own weight to an oval cross section, with consequent flexure during rotation. Length is not necessarily limited, but it becomes difficult to cope with changes in length on heating and cooling (typically around 0.1 to 0.5% of the length) if the kiln is very long.

Refractory Lining:
The purpose of the refractory lining is to insulate the steel shell from the high temperatures inside the kiln, and to protect it from the corrosive properties of the process material. It may consist of refractory bricks or cast refractory concrete, or may be absent in zones of the kiln that are below around 250°C. The refractory selected depends upon the temperature inside the kiln and the chemical nature of the material being processed. In some processes, such as cement, the refractory life is prolonged by maintaining a coating of the processed material on the refractory surface. The thickness of the lining is generally in the range 80 to 300 mm. A typical refractory will be capable of maintaining a temperature drop of 1000°C or more between its hot and cold faces. The shell temperature needs to be maintained below around 350°C in order to protect the steel from damage, and continuous infrared scanners are used to give early warning of "hot-spots" indicative of refractory failure.

Tyres and Rollers:
Tyres, sometimes called riding rings, usually consist of a single annular steel casting, machined to a smooth cylindrical surface, which attach loosely to the kiln shell through a variety of "chair" arrangements. These require some ingenuity of design, since the tyre must fit the shell snugly, but also allow thermal movement. The tyre rides on pairs of steel rollers, also machined to a smooth cylindrical surface, and set about half a kiln-diameter apart. The rollers must support the kiln, and allow rotation that is as nearly frictionless as possible. A well-engineered kiln, when the power is cut off, will swing pendulum-like many times before coming to rest. The mass of a typical 6 x 60 m kiln, including refractories and feed, is around 1100 tonnes, and would be carried on three tyres and sets of rollers, spaced along the length of the kiln. The longest kilns may have 8 sets of rollers, while very short kilns may have only two. Kilns usually rotate at 0.5 to 2 rpm, but sometimes as fast as 5 rpm. The Kilns of most modern cement plants are running at 4 to 5 rpm. The bearings of the rollers must be capable of withstanding the large static and live loads involved, and must be carefully protected from the heat of the kiln and the ingress of dust. In addition to support rollers, there are usually upper and lower "retaining (or thrust) rollers" bearing against the side of tyres, that prevent the kiln from slipping off the support rollers.

Drive Gear:
The kiln is usually turned by means of a single Girth Gear surrounding a cooler part of the kiln tube, but sometimes it is turned by driven rollers. The gear is connected through a gear train to a variable-speed electric motor. This must have high starting torque in order to start the kiln with a large eccentric load. A 6 x 60 m kiln requires around 800 kW to turn at 3 rpm. The speed of material flow through the kiln is proportional to rotation speed, and so a variable speed drive is needed in order to control this. When driving through rollers, hydraulic drives may be used. These have the advantage of developing extremely high torque. In many processes, it is dangerous to allow a hot kiln to stand still if the drive power fails. Temperature differences between the top and bottom of the kiln may cause the kiln to warp, and refractory is damaged. It is therefore normal to provide an auxiliary drive for use during power cuts. This may be a small electric motor with an independent power supply, or a diesel engine. This turns the kiln very slowly, but enough to prevent damage.

Internal heat exchangers:
Heat exchange in a rotary kiln may be by conduction, convection and radiation, in descending order of efficiency. In low-temperature processes, and in the cooler parts of long kilns lacking preheaters, the kiln is often furnished with internal heat exchangers to encourage heat exchange between the gas and the feed. These may consist of scoops or "lifters" that cascade the feed through the gas stream, or may be metallic inserts that heat up in the upper part of the kiln, and impart the heat to the feed as they dip below the feed surface as the kiln rotates. The latter are favoured where lifters would cause excessive dust pick-up. The most common heat exchanger consists of chains hanging in curtains across the gas stream.

Our rotary kiln includes dry-process cement rotary kiln, semi-dry-process cement rotary kiln, wet-process rotary kiln and chemical industrial rotary kiln such as self-return soda ash steam calciner.

 Introduction of self-return soda ash steam calciner:
Soda ash is the basic industrial raw material, which plays an important role in national economy. It is widely used in industries such as chemistry, glass, metallurgy and petroleum, etc. Our self return soda ash steam calciner is the key equipment of soda ash manufacturing. It decompositions and extractions the wet-heavy soda returned from filter process by indirect steam heating. This structure greatly simplify the production, which is very good for factory reforming, expanding and building. Meanwhile, it is of low energy consumption and less pollution. We designed and manufactured the Ф3.2×32m self return soda ash steam calciner, with output of 800 ton per day, which is, currently, the largest size self return soda ash steam calciner in China now.

Advanced Technical Index:
1. Production Capacity: Reaching to 3.5-4.0 ton /m³ per day.
2. CO2 concentration in the Furnace Gas: When the pressure at the furnace end is 50MPa, the average furnace gas concentration is more than 90%.
3. Products Quality: All products reach to premium grade. The products ignition loss is no more than 0.5%.
4. Soda Ash Steam Consumption: 1.3 ton.
5. Equipment Running Period: Continuous running period can be more than 6 months, so there is no need of backup equipments.

 

 

 

Other products from this supplier

Dry-Process Cement Rotary Kiln Used for Cement Plant    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set
Bauxite Rotary Kiln    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set
Rotary Kiln for Building Material Manufactory    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set
Rotary Kiln for Cement Manufacturing    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set
Lime Rotary Kiln    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set
Metallurgy Rotary Kiln    
FOB Price: 1,000,000.00-8,000,000.00 USD/Set
Min Order: 1 Set

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Mr. Robin Chia
Join ECVV community
Join Facebook Group