Dolls Tower| Manufacturer
Dolls Tower

China Manufacturer with main products: Silicone Rubber, Molding Silicone, Injection Silicone Rubber, Silicon Rubber, Silicone, RTV Silicone, RTV-2 Addition Silicon, RTV Liquid...

Home  >Products Catalog > Liquid Silicone Rubber for Tyre Molding

Liquid Silicone Rubber for Tyre Molding SafeBuy Supplier Member

FOB Price: 15.80 - 20.88 USD/Kilogram
Supply Ability: 10 Ton per Day
Shipping: within 3 days after reveiving the bank receipt
Payment Terms: L/C, T/T, Western Union
In Stock
Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Place of Origin: Guangdong in China
Packaging Details: 25kg/drum 200kg/drum


HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1), mainly be suitable for making molds application.
Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making, prototyping etc.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .

* low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1 /10:1)
*very good flow and easy for pouring operation
*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Technical Parameters
Hardness(shore A)
20± 2
Mix ratio(A: B)
Viscocity Part A(mPa. S)
23000± 2000
Viscocity Part B(mPa. S)
3500± 500
Tensile strength (kgf/cm2)
45± 5
Tear-strength (kN/m)
20± 2
500± 50
Pot life/working time (mins)
Curing time/setting time (hrs)
Shrinkage rate (%)
(Please note: the above data for this product in 25℃ temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using. )
Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2. Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4. And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Other products from this supplier

Electronic Potting Silicone Rubber    
FOB Price: 12.80-20.00 USD/Kilogram
Min Order: 200 Kilogram
RTV-2 Silicone for Making Molds    
FOB Price: 5.30-8.30 USD/Kilogram
Min Order: 200 Kilogram
RTV-2 Silicone Liquid Silicone Rubber    
FOB Price: 5.80-8.30 USD/Kilogram
Min Order: 200 Kilogram
Pad Printing Silicone Rubber without Impurity    
FOB Price: 8.50-12.50 USD/Kilogram
Min Order: 100 Kilogram
Pad Printing Silicone Rubber    
FOB Price: 6.30-13.40 USD/Kilogram
Min Order: 200 Kilogram
RTV Silicone Rubber Particularly Suitable for Gyspum Product's Mold Making    
FOB Price: 5.50-8.50 USD/Kilogram
Min Order: 200 Kilogram

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Ms. Isabell
Join ECVV community
Join Facebook Group