| Export Markets: | North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe |
|---|---|
| Place of Origin: | Jiangsu in China |
Specifications
Conventional rotator (turning roller)
(1) Rotators mainly consist of power unit, idler unit, electric control box and hand control panel.
(2) rotators (turning rolls) are used for the inside and outside circumferential and longitudinal welding.
(3) The distance of rollers can be adjusted by bolt or lead screw.
(4) VFD speed control, being stable and precise.
(5) Rubber, steel or PU wheel, it is all on customers' decision.
(6) It can be designed as movable type.
(7) There is a hand control box to facilitate operation.
(8) Brand of motor, reducer and electrical part:
motor: Hengxing
reducer: CEMA / Intervek
electrical part: Schneider
Inveter: Taida from Taiwan
(2) rotators (turning rolls) are used for the inside and outside circumferential and longitudinal welding.
(3) The distance of rollers can be adjusted by bolt or lead screw.
(4) VFD speed control, being stable and precise.
(5) Rubber, steel or PU wheel, it is all on customers' decision.
(6) It can be designed as movable type.
(7) There is a hand control box to facilitate operation.
(8) Brand of motor, reducer and electrical part:
motor: Hengxing
reducer: CEMA / Intervek
electrical part: Schneider
Inveter: Taida from Taiwan
Technical parameters:
Type : HGK-5 / Conventional type
Main Consistent: 1 power unit , 1 idler unit and 1 hand control pendant.
Power supply: 380V 3 Phases 50Hz
Speed control : Variable Frequency Drive (VFD)
Applicable diameter of working piece (mm): Φ 250-2300
Loading capacity (T): 2
Roller diameter (mm) : Φ 200*100
Liner speed (mm/min) : 100-1000
Motor power (kw): 2*0.37
Roller Material : PU
Control Method: hand control panel
