Hopeland Co., Ltd.

China Manufacturer with main products: aac plant, concrete pole making machine, concrete pipe mould

Home  >Products Catalog > Pre-Stressed Concrete Pole Steel Mould

Pre-Stressed Concrete Pole Steel Mould

Payment Terms: L/C
Export Markets: South America, Eastern Europe, Southeast Asia, Africa, Mid East, Eastern Asia

Specifications

This mould is used for electronic concrete pole making. Its mainly manufacture techniques is longitudinal tensioning the steel wire skeleton, then squeezing out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.

In order to make the concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the release cycle.
Our factory products two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment is accord with the standard JC/T364-2001 of People's Republic of China.

Features
1) Welding technique, which enhance the smooth finish of the mould wall, and eliminate uneven traces of rivet holes. So the concrete poles' appearance will be improved significantly.
2) The cylinder is changed to U-longitudinal stiffener, it can greatly increase the stiffness and flexural strength of the steel mould,
3) Install the slot with plastic sealing strip, in order to prevent leakage to ensure quality.

Technical Data

1) DMZ series
Internal diameter of the smaller mm Length m Distance between wheels m Wheel diameter mm Length m Distance between wheels m Wheel diameter mm

100 6~7 2 /
600 / / /
130 6~8
150 6~11
170 7~12
190 7~13 15 2 650
230 6~9 12
270 6 9
270 6 9

283 6 600 / /
310 6~9 650 / /
350 6 9 700
390 6 700 9 750
430 6 750 / /
470 6 780 / /
510 6 800 9 850
550 6 850 / /

2) DMD series

Internal diameter
Mm Length m Distance between wheels m Wheel diameter
300 4.5~9 2 600
400 4.5~9 2 650
500 4.5~9 2 750

Work principle
1) The steel mould works with pole spinning machine. The steel mould should be placed on the spinning machine smoothly.
2) Put the slurry into the mould and rotate in different directions under the motor driven.
3) In this process, the redundant water in the concrete is released by the force of centrifugal, and the concrete is dense and high strength.

Pre-Stressed Concrete Pole Steel Mould from this supplier

concrete electric pole steel mould    
FOB Price: 500.00-2,000.00 USD/Piece
Min Order: 1 Piece
Electric concrete pole making machine ,concrete pole mould    
FOB Price: 10,000.00-20,000.00 USD/Set
Min Order: 1 Set
Steel Mould for Concrete Pole Plant    

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join Facebook Group