IP 67 waterproof wind controller

Specifications

 Waterproof model IP67 pure wind controller product features and characteristics:
Guangzhou Sunning wind controller could control the wind turbine to charge the battery automatically. When the battery is full, the controller will make the wind turbine brake, and stop generate power, after the battere voltage drop to recovery voltage, the wind turbine will go on working and charge the battery, it is not only protect the wind turbine and battery, but also make sure the best charging .Also the controller special for protect the system, reverse connection protection, it will make the system comes more smoothly .

1.Safety Instructions
1.1 Please make sure the output voltage of wind generator is consistent with rated battery voltage.
1.2 Please connect the cables of plus-n-minus of battery firstly and then connect the three cables of wind generator.
1.3 Please make sure you connect battery and wind generator with controller according to this instruction, opposite polarity or wrong position connection will result in abnormal operation of system or damage of system components.
1.4 When operating hand braking, please make the smaller red cable and battery anode in short circuit,then controller will brake. Disconnect the smaller red cable, hand braking function will be cancel.

2. Wiring
2.1 Connect the " +" and " -" of battery with battery plus-n-minus input terminals of controller.
2.2 Connect the three cables of wind generator with three voltage input terminals of wind generator of controller.

3. Lights
3.1 When battery light (green) is on, it indicates battery connection is normal.
3.2 When wind generator light (green) is on, it indicates wind generator connection is normal and it shows the rotation speed of wind generator by twinkle speed.
3.3 When brake light (red) is on, it indicates controller is braking automatically due to battery full charged or over-current protection function operation of controller.

4.Technical Data: