| Export Markets: | North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe |
|---|---|
| Place of Origin: | Guangdong in China |
| Packaging Details: | 6pcs in a carton |
Quick Details
- Brand Name: sun source
- Model Number: SS-WVC-295W
- Output Power: 201 - 300W
- Output Type: Single
- Size: 19.5*13*3.2CM
- Weight: 0.85KG
- Input Voltage: 22-50V
- Output Voltage: 110/220V
- Type: DC/AC Inverters
- Output Frequency: 50/60HZ
- Output Current: 3A
Specifications
22-50V DC Pure Sine Wave Solar Inverter 295W Solar Grid Tie Micro Inverter
Note: When you make order for this item, please leave messenger to us for right output voltage (AC) of the inverter what kind of ac plug you want. If you don't any mark, We will send according to our experience for each country. Thank you!!
Features:
- High performance maximum power point tracking(MPPT)
- Reverse power transmission
- Intelligent monitoring management
- Input/Output is fully isolated to protect the electrical safety
- Multiple parallel stacking
- Digital control systemSimplify maintenance(user serviceable)
- Operation and maintenance costs low
- Flexible installation
Note of Solar Inverter
Before choose the inverter,please take a look of the parameter table.
1.Make sure DC operating voltage range of the PV module with the allowable input voltage range of the micro inverter.
2.The maximum open circuit voltage of the PV module must not exceed the specified maximum input voltage of the micro inverter.
Parameter table of Solar Inverter
|
Input Data |
Recommended input power |
200-300W |
|
|
Recommend the use of PV modules |
300W/Vmp>34V;Voc<50V |
||
|
Min/Max start voltage |
22-50V |
||
|
Maximum DC short current |
15A |
||
|
Maximum Input Current |
9.8A |
||
|
Output Data |
Output voltage |
120v(80-160VAC) |
230v(180-260VAC) |
|
Peak power output |
260W |
260W |
|
|
Rated frequency range |
57-62.5HZ |
47-52.5HZ |
|
|
Power factor |
>98% |
>98% |
|
|
Maximum units per branch circuit |
15Pcs(Single-phase) |
30Pcs(Single-phase) |
|
|
Output Efficiency |
Static MPPT efficiency |
99.50% |
99.50% |
|
Maximum output efficiency |
92.30% |
94.60% |
|
|
the averange efficiency |
91.20% |
93.10% |
|
|
Night time power consumption |
<50mW Max |
<70mW Max |
|
|
THD |
<5% |
<5% |
|
|
Exterior |
Ambient temperature |
-40℃ to +60℃ |
|
|
Operating temperature range |
-40℃ to +82℃ |
||
|
Waterproof Rating |
IP67 |
||
|
Cooling |
Self-cooling |
||
|
Feature |
Communication Mode |
Power Line |
|
|
Power transmission mode |
Reverse transfer,load priority |
||
|
Certificate |
CEC ,CE,National patent technology |
||
|
Package |
Dimensions(W×H×D) |
|
|
|
Net weight |
0.65kg |
||
|
Gross weight |
0.85kg |
||
|
Package(L x W x H) |
Inner box:24.5x20x6CM Big box:41.8x38.8x26.8CM |
||
Installation
Step1 Installation for fixed the
inverter on the PV holder with the screws attached
Step2 Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative.
Step3 Open the waterproof cap on AC output side of the micro
inverter, then plug to AC power
line.
Step4 Plug the AC output line to main AC cable;
Step5 Repeat the fir st step to the third step to complete the installation of micro inverter s;
Step6 Finally, please connect the AC main cable to the utility grid to run renewable energy and saving $$$!
Notes:
1.Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons
2.Non-professionals do not disassemble.Only qualified personnel may repair this product.
3.Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating,and clear
around the inflammable and explosive materials.
4.When using this product, avoid children touching,playing, to avoid electric shock.
5.Connected solar panels, battery or wind generators DC input DC power supply cable.
Accessories for product:
1.One warranty card;
2.One user manual;
3.One certificate of quality;
4.1 pouch of screw for micro inverter installation;
5.One AC Cable;
LED Display
1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;
2.Green flash fast---MPPT searching;
3.Green flash slow---MPPT + searching;
4. Red flash slow---MPPT - searching;
5.Green lights on 3s and off 0.5s---MPPT locked;
6.Red light steady---a. Islanding protection;b.Over-temperature protection;c.Over / low AC voltage protection;
d. Over / low DC voltage protection; e.Fault
Remark
LED flashing in the process of being working condition:inverters connected to AC & DC sides→Red LED light 3 second→Green LED flash fast(MPPT searching)→Green LED flash slow(MPPT + searching) / Red LED flash slow (MPPT - searching) / reen LED lights on 3s and off 0.5s (MPPT locked)
Warranty:
15 years limited warranty
