UAE
QA
Mar
Egypt
Kuwait
Turkey
India
Specifications
Product Introduction
Equipped with centrifugal atomizer, centrifugal spray drying tower is one of the most widely used dryer in industrial production. By adding material liquid to the high speed rotating spray tray , liquid is flung into droplets after drying in the drying chamber subjected to centrifugal force.
Working Principle
Feed pump sends pump water reducing agent solution to the high speed centrifugal atomizer in the middle of the drying tower by using high speed rotating centrifugal force, the material liquid to spray fine droplets. Approved by the heat source of hot air, heating points after reasonable ventilation, wind into the drying tower. Droplets are fully mixed with hot air drying tower, for heat and mass transfer in quickly, in a very short period of time be dry powder products, grain size larger products from dry bottom, smaller particle size product with hot air into the cyclone dust collector, separation of products by the discharge valve discharge, via water containing a small amount of dust exhaust dust after emptying.
3) performance characteristics
1. The one-time continuous drying can be realized.
2. The spray drying of fog moment and droplets particle diameter can be adjusted
3. Reasonable air distribution.
4. The product particles are more fine than that by pressure type spray.
5. The production process is simple and operates conveniently.
The model project
GPL
25
50
150
200
300
500
1000
1500
2000
Evaporation capacity(kg H20/h)
25
50
150
200
300
500
1000
1500
2000
Tower diameter(m)
1.7
2.2
2.5
3
3.3
4.5
5.5
6.2
6.8
Covering length * width(m*m)
4*3
5*3
6*8
6*8
8*8
8*10
10*10
10*12
12*12
The height of the tower (m)
5
6
7
7.5
8
10
12
13
16
Atomization method
Pressure nozzle atomization
the temperature of Inlet air (℃)
120-450
Other
Evaporation capacity refers to the inlet air temperature is 350 ℃ ability / heat source: electric heating, coal-fired, fuel, gas, hot air furnace and flue gas furnace etc..
Product parameter
