Good permeability Recycle Powder Coating for EPC

Specifications

Features of Recycle Powder Coating

?Good wettability

? Excellent gas permeability

? High intensity and refractoriness

? Better Coated hang and suspension

Model and applications of Recycle Powder Coating

Product Use-Method

Ratio of 1: 0.7 of the product and the water poured into the mixer and stir in accordance with the process requirements for 30-90min. Stop stirring when it achieve the construction requirements Baume value. Besides, the product adapt to spray, dip coating, spraying, brushing and smearing process.

Notice

This product is safe and non-toxic. According to Regulations on the Control over Safety of Dangerous Chemicals, danger signs are not required, but you should avoid inhalation of the nose and mouth. If there is any production problem, please contact us promptly.

1) In Jinaiyuan, customer first is always the highest standards for our actions.

2) For each client to provide the best solution is the fundamental principle of our service.

3)Providing customers with the most suitable products and the corresponding technique, to meet different requirements of different customers based on the different technical characteristics of each customer and product applications, materials and technical requirements,

4) We will provide technical support at any time when the problems arise in the process of using.

Quality Control of Recycle Powder Coating

Raw Material Selection:

To ensure the quality of our raw materials, we only purchase our raw materials from our longterm trusted suppliers. With every purchase, our quality control staff performs the first inspection at our supplier's site. Once the raw materials arrive at our facility, our quality control team performs a second inspection on the batch. Each time raw materials enter our facility, they are inspected again prior to being accepted.

Process Quality Control:

From raw material to final product, our process control inspectors ensure that our procedures are consistently and correctly applied each step of the way. In addition to rigorous process control, our quality control team inspects the output of each process to ensure material quality and consistency. In each of our workshops, our employees understand that the output of their workshop is the input for the next manufacturing department. Therefore they have been trained to always carefully inspect the previous workshop's work and be responsible for their own output.

Company Information 

1)We are manufacture

We produce nearly hundred kinds of products which belong to more than a dozen series, covering foundry spherical porcelain sand, coating, furnace lining, deslagging agent, cover agent, recarburization agent, resulfurization agent and desulfurization agent, etc.