Zhengzhou Shibo Nonferrous Metals Products Co., Ltd.

China Manufacturer with main products: Molybdenum Sheet, Molybdenum Rods, Molybdenum Electrode, Tungsen Sheet, Tungsten Rods, Lab Furnace, Mosi2 Heater, Sic Heater

Home  >Products Catalog > Factory direct sale U type sic heating element rod

Factory direct sale U type sic heating element rod

FOB Price: 10.00 - 20.00 USD/Piece
Supply Ability: 100 Piece/Pieces per Week
Shipping: 5-10 DAYS
Payment Terms: T/T
In Stock

Related products from verified members

Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Place of Origin: Henan in China
Packaging Details: WOOD CASE

Quick Details

  • Type: Other Home Appliance Parts
  • Brand Name: SIBO
  • density:: >=3.02g/cm3
  • Open porosity:: <0.1
  • Bending strength:: 250Mpa(20centigrade), 280Mpa(1200centigrade
  • Modulus of elasticity: 330Gpa
  • Thermal conductivity:: 45W/m.k(1200centigrade )
  • Coefficient of thermal expansion:: 4.5K-1*10-6
  • Acid and alkali resistance: Excellent
  • Name:: Sic Heating Element
  • SiC Content (%):: 95%


Description for  shaped SIC heating element  


The shaped SIC heating element   is a resistance type silicon carbide heating elements. The elements are thick walled tubes. They have a central heating section referred to as a hot zone and two terminal sections called cold ends. The cold ends are impregnated with silicon metal to lower their resistance.


This causes them to operate at a lower temperature. The extremities of the sic heating elements are metalized with aluminum to provide a low resistance contact surface to which the electrical connections are made with braided aluminum straps. Elements are described by giving the overall length, the heating section length, the diameter and resistance


Features for The   SIC heating element


High Performance :


The  SIC heating elements will give you superior performance due to their high density – approximately 2.4gms/cc. This gives the element very slow aging characteristics and additional strength.


Operating Temperatures :


The shaped SIC heating elements can be operated at furnace control temperatures up to 14500C in an air atmosphere or inert atmospheres of argon or helium. In reducing atmosphere the maximum recommended operating temperature is 13500c.





The shaped SIC heating elements  is a linear resistance heater that converts electrical energy to heat energy(Joule's LawW = 12R). W=power in watts, l = Current in amperes, R = resistance in ohms.


The shaped SIC heating elements are often referred to as self-bonded, for the lattice structure or bonds that hold the elements together are formed by recrystallizing the silicon carbide at very high temperatures. The elements are manufactured of green silicon carbide which is classed as an excess electron type semi-conductor.


The resistance of a silicon carbide element is difficult to measure at room temperature due to minor impurities, self heating and contact resistance. Also the green silicon carbide has a negative resistance temperature characteristic from room temperature to approximately 8000C.


It turns positive at this point and remains so throughout its normal operating temperature range. A typical resistance temperature characteristic curve of a silicon carbide heating element is show in Fig.C


                           The specification for  SIC heating elements


Diameter of
calorific section
Length of
calorific section
1200±50°C Resistance error range(%)


 The relation between temperature and surface load


Furnace temperature(°C)
The surface load of calorific section(w/cm*cm)
less than 17
less than13
less than9
less than7
less than5
less than4


working Life for the  SIC heating elements 


The SIC heating elements increase gradually in resistance with use. This characteristics of increasing in resistance is called aging. Aging is a function of the following :

  • Operating temperature.
  • Electrical loading – usually expressed in watts per square centimeter of element radiating surface
  • Atmosphere
  • Type of operation (continuous or intermittent)
  • Operating and maintenance techniques

Asseming for  SIC heating elements :


There are no restrictions on the mounting positions of  SIC heating Element, the horizontal and vertical positions are the more common. Extreme caution should be used when mounting to insure that the elements are not placed in tension. There should be adequate freedom to allow for the furnace and elements to expand and contract independently.

When mounting elements vertically they must be supported on the lower end by electrically insulated supports.


The SIC heating Elements should have their heating sections centered in the furnace chamber so that no portion of the heating section extends into the furnace wall. A conical or truncated cone shaped recess ? inch deep is located on each interior wall where the element passes through. This allows the hot zone to radiate properly and helps maintain a uniform temperature in the kiln.


Professional manufacturer of the Sic heater ,Good quality and competitive price.
Material: Silicon Carbide

Service Process

Service Guarantee

  • Free Service Charge

    ECVV doesn't charge any service fee to Buyers for buying this product.

  • ECVV Supply

    ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.

Ecvv Trade

sic heating element rod from this supplier

125Mmx62.5Mm White 500Watt Infrared Ceramic Heating Element Heater    
FOB Price: 8.00-12.00 USD/Piece
Min Order: 2 Pieces
High-Quality & Cheap W Shape Mosi2 Heating Element    
FOB Price: 20.00-200.00 USD/Piece
Min Order: 20 Pieces
Extruder 480V 2080W Heating Element 165.1*139.7Mm Mica Band Heater for Plastic Injection Molding    
FOB Price: 7.00-10.00 USD/Piece
Min Order: 1 Piece
480V 1070W Eletric Heating Circle Resistencias 152.4*57.15Mm Mica Barrel Band Heater    
FOB Price: 5.00-6.64 USD/Piece
Min Order: 2 Pieces
240V 630W Electric Molding Machine Ring Heating Element 101.6*63.5Mm Ss304 Stainless Steel Mica Band Heater    
FOB Price: 3.39-4.80 USD/Piece
Min Order: 2 Pieces

More products from other suppliers

Kerosene oil Heater Blow Lamp    
FOB Price: 5.80-7.00 USD/Piece
Min Order: 200 Pieces
Induction heating system    
Min Order: 1 Set
Used oil heater HBH-10    
FOB Price:
Min Order: 1 Set
Electric Thermal Oil Heater with Cool Unit for Cool Down The Temperature    
FOB Price: 2000.00-20000.00 USD/Set
Min Order: 1 Set
korea popular electric ceramic heater    
FOB Price: 15.00-16.00 USD/Piece
Min Order: 1,000 Pieces

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join ECVV community
Join Facebook Group