Ecvv Trade
Shenzhen Gaoyuantong New Material Technology Co., Ltd.

China Manufacturer with main products: Alcohol-Soluble Polyurethane Single/Dual Component Adhesive, Water-Soluble Polyurethane Dual Uble Polyurethane Adhesive, Ester-Soluble...

Home  >Products Catalog > PU-6050 Alcohol Soluble Polyurethane Adhesive

PU-6050 Alcohol Soluble Polyurethane Adhesive

Shipping: 1 week, FOB Shenzhen
Payment Terms: L/C, T/T

Related products from verified members

Export Markets: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia
Place of Origin: Guangdong in China

Quick Details

  • Model Number: PU-6050
  • Brand Name: GaoYuanTong
  • Usage: Packing
  • Main Raw Material: Polyurethane
  • Classification: Volatile Solvent Adhesives



I.         Product Performance

1.   The Product is suitable for dry laminating of food, drugs and flexible packaging, especially for products having strict requirements for the residual and abnormal smell in light packaging under 5 °C. The product has good transparency;

2.   It is cost-effective to adopt alcohol as the solvent. In this way, the cost is reduced. A solvent with low toxicity and little irritation is adopted to greatly improve the working environment and ensure safety and environmental protection.

3.   The ink is widely-used and may combine with general chlorinated polypropylene, alcohol soluble polyurethane and water-based ink, so that the product demonstrates good leveling performance and mottling does not easily occur in laminating white ink.

4.   The Product is suitable for the lamination of thin films, such as BOPP, PA, CPP, PE, PET, etc., and may be adapted to a working environment with relatively high temperature.

II.      Diluents:

The adhesive may adopt ethyl alcohol and isopropyl alcohol with purity of over 99% as solvents.If a solvent of low purity is adopted, the adhesive solution will be muddy and white, thus affecting the coating effects. In the solvent, the volume content of ketones is less than 0.5%, and that of aldehyde is less than 0.02%.

III.   Hygienic Standards  

1.   GB9685-2003 (Hygienic Standards for Uses of Additives in Food Containers and Packaging Materials)

2.   GB15193-94 (Procedures and Methods for Toxicological Assessment on Food Safety).

IV.   Physical Properties





Colorless Transparent Liquid

Solid Content (%)



Viscosity (Mpa.s/25%)




Ethyl Alcohol

Ethyl Acetate







1.   Calculation Formula for Adhesive Dilution:

2.   Table of Standard Proportion and Solvent Dilution Parameters (See the following table)

Working Concentration



Solvent (kg)

Viscosity (ZGhn3# Cup/25 seconds)


6 kg

1 kg

1.4 kg



6 kg

1 kg

2.8 kg



6 kg

1 kg

4.8 kg



6 kg

1 kg

7.7 kg



V.      Operating Conditions  

1.   Dilution: Sufficient solvent is first added to the main agent and fully stirred, and then the hardening agent is added and fully stirred.

2.   Coating Method: It is suitable for coating any smooth roll and Anilox roll, and according to the coating weight as required in the process, the line numbers and mesh depth of the pressure roll and Anilox roll are reasonably proportionate;

3.   Working Concentration: The generally recommended concentration is 20% ~ 30%, and the optimum concentration is 30%.

4.   Coating Weight: 1.5 g/~3.0g/ may be selected for the dry coating.

5.   Drying: on the premise of ensuring lamination speed, the temperature of the drying tunnel shall be properly raised or the air quantity shall be increased.When the drying system has three or more sections, the temperature of the entry end shall be controlled at 55°C ~ 65°C; and that of exit end may be raised to 75°C ~ 85°C degrees for setting the temperature gradient.

6.   Lamination Pressure and Temperature: In order that thin films are not damaged and the opening property of the inner layer is not affected, the pressure and temperature of the lamination roll shall be raised as far as possible. According to the different products, the temperature range is generally controlled within 60°C~80°C.

7.   Curing: It may be cut and made into bags after maturation of 12 – 24 hours at 45±5℃. Thin type packaging may be not cured or naturally cured when the indoor temperature is more than 40℃.

8.   The Product shall be stored in a dry and cool place, with a validity period of one year for the main agent and ten months for the curing agent.

VI. Packing Specifications  

JY6050A/18 Kg/Barrel & JY6050B/3 Kg/Barrel

Service Process

Service Guarantee

  • Free Service Charge

    ECVV doesn't charge any service fee to Buyers for buying this product.

  • ECVV Supply

    ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.

flexible packaging polyurethane lamination adhesive from this supplier

More products from other suppliers

Min Order: 1 Metric Ton
self adhesive vinyl    
FOB Price: 0.40-0.50 USD/Roll
Min Order: 50 Rolls
Concrete protector    
Min Order: 20 Kilogram
Mutiflon Teflon Mesh Conveyor Belt    
FOB Price: 3.00-10.00 USD/Square Mile
Min Order: 10 Square Miles
Wallpaper Adhesive    
FOB Price: 7.00-9.00 USD/Ton
Min Order: 5 Ton

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join Facebook Group