Ecvv Trade
Foshan Shunde Mimdy Sealant Co., Ltd.

China Manufacturer with main products: Silicone Sealant, Building Sealant, Industry Sealant, Weather Proofing Sealant, Insulating Glass Sealant, General Purpose Sealant, Thermal...

Home  >Products Catalog > Concrete joints silicone sealant

Concrete joints silicone sealant

Payment Terms: T/T, Western Union, MoneyGram, Other, Paypal
Export Markets: North America, South America, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia
Packaging Details: Disposable cartridges:net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages:net 590ml, 500

Quick Details

  • Model Number: CO652
  • Brand Name: mimdy
  • Main Raw Material: Silicone

Specifications

CO652 Concrete joints silicone sealant

Features:
1.One component, neutral curing, good extrusion and thixotropy , easy to use.
2.Excellent unprimed adhesion and bonding to concrete.
3.Abrasion resistant.
4.Low modulus-able to stretch in the joint with little force, so it can better protect the concrete surfaces from being damaged .
5.Resilient-once cured, strong anti-embedding performance, preventing gravels and other incompressible into the joints which may result in joint edge failure.
6.High movement capability-able to accommodate the extension and contraction, and shear deformation of concrete joints without itself being destroyed.
7.Remains flexible over a temperature range of -58°F(-50℃) to 302°F(150℃).
8.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes.

Main applications:
Sealing for concrete joints.

Limitations:
1.Can not be used in structural glazing applications or where the sealant is intended as an adhesive.
2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface.
3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure.
4.Not for frost or wet surface.
5.Is not suitable for the place of continuous immersion or year-round moisture.
6.Is not suitable where movement capability greater than ±25% is required.
7.Hasn't performed adhesion and compatibility tests on project substrates and all accompanying accessories.

Typical properties:
These values are not intended for use in preparing specifications.

Test Method Property Unit Result
GB/T 13477 (ASTM D 2377) Tack free time min. 59
GB/T 13477 (ISO 8394) Extrusion rate ml/min. 183
GB/T 531 (ISO7619) Hardness Shore A 30
GB/T 13477 (ISO 8339) 100% modulus MPa 0.4
GB/T 528 (ISO 37) Elongation at break(dumbbell type) % 1000
GB/T 13477 (ISO 11600) Movement capability % +100~-50
ASTM C793 Aging resistance Qualified

GB: Chinese National Standard
ASTM: American Society for Testing and Materials
ISO: International Standardization Organization The " GB" testing method is equivalent or partly equivalent to that in the" ( )"

Installation:
1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application. Using proper materials and cleaning procedures is vital for sealant adhesion.
2.Cleaning materials: clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required).
3.Cleaning procedures: Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again.
4. Primers:CO652 Concrete Joints Silicone Sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated.

Emergent Treatment:
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.

Shelf Life:
12 months from the manufacture date stored in cool & dry place below 27 ℃.

Color:
Black, gray, other colours as clients' requirement.

Packing:
Disposable cartridges: net 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box.   Sausages: net 590ml, 500ml; 20 pcs / box.

LIMITED WARRANTY INFORMATION – PLEASE READ CAREFULLY

The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer's tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.'s products are safe, effective, and fully satisfactory for the intended end use.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.

FOSHAN SHUNDE MIMDY SEALANT CO., LTD. DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Service Process

Service Guarantee

  • Free Service Charge

    ECVV doesn't charge any service fee to Buyers for buying this product.

  • ECVV Supply

    ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.

Silicone Sealant from this supplier

Distributor Hpmc for Tile Adhesive Methyl Hydroxypropyl Cellulose    
FOB Price: 2650.00-3030.00 USD/Metric Ton
Min Order: 1 Metric Ton
Women Sanitary Towel Hot Melt Adhesive    
FOB Price: 2.00-5.00 USD/Kilogram
Min Order: 1000 Kilograms
SINYE No-Bake Furan Resin Suitable for the Production of Steel, Iron & Nonferrous Castings    
FOB Price: 1500.00-2500.00 USD/Ton
Min Order: 1 Ton
Mutiflon Teflon Mesh Conveyor Belt    
FOB Price: 3.00-10.00 USD/Square Mile
Min Order: 10 Square Miles
2020 Low Viscosity High Quality Hydroxymethyl Cellulose Ether HPMC    
FOB Price: 2650.00-3030.00 USD/Metric Ton
Min Order: 1 Metric Ton

More products from other suppliers

Redispersible polymer powder    
FOB Price: 2.15-2.20 USD/Kilogram
Min Order: 500 Kilograms
PU Adhesive for Fabracated Tiles    
FOB Price:
Min Order: 1 Metric Ton
self adhesive vinyl    
FOB Price: 1.00-6.00 USD/Meter
Min Order: 2000 Meter
HENSO Waterproof Breathable Sterile PE Adhesive Strip    
FOB Price: 0.56-0.75 USD/Box
Min Order: 10,000 Boxes
Adhesive thermal silicon pad    
FOB Price: 1.00-20.00 USD/Piece
Min Order: 100 Pieces

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Sourcing from ECVV
Join ECVV community
Join Facebook Group