Bk 45 Thermostatic Y Type Bimetallic Steam Trap

Specifications

The Thermostatic Bimetallic Steam Trap BK45 is used for low capacity applications such as drip and tracing, and economically combines steam trap, check valve and Y-Strainer (with optional blow off valve) in a small profile with a convenient 2-bolt cover for easy maintenance.
Features and Benefits
? Forged steel body and cover.
? Pressure assisted fail-open design.
? Factory-preset bimetallic regulator with integral staged nozzle. No adjustment required.
? Discharges hot condensate in a modulating fashion at approximately 18°F (10°C) below saturation temperature throughout its operating range. One internal regulator for all pressure ranges.
? Unaffected by water hammer or superheat-solid stainless steel internals.
? Self draining - will not freeze when installed in gravity drainage position.
? Automatically vents air and non-condensable gases and has a high (6:1) cold water capacity for rapid start-up.
? Operates with zero steam loss throughout its operating range saving steam and money during the life of the trap.
? Easy in-line inspection and maintenance - mechanical stops prevent crushing of the gasket for extended gasket life.
? Can be installed in any position.
? Internal stainless steel Y-strainer, with optional blowoff valve.
? Integral check valve design.
Materials
? Body and Cover - ASTM A105 (DIN 1.0460)
? Cover Bolts - ASTM A193 B7 (DIN 1.7258)
? Bimetallic Regulator - Stainless Steels
? Other Internals - Stainless Steel                                                                                                   Available End Connections
Flanges: ANSI 150RF and 300RF (DIN, PN 40)
Screwed sockets: NPT, BSP
Socket-weld, Butt weld