Ningbo Wit Pneumatic Co., Ltd.

China Manufacturer with main products: Air Source Treatment, Directional Control Valve, Mechanical Valve, Solenoid Valve, Air Cylinder, Pneumatic Fitting, Air Hose, Ball Valve

Home  >Products Catalog > Air Cylinder > MINI ALUMINUM AIR CYLINDER (MAL20X50)

MINI ALUMINUM AIR CYLINDER (MAL20X50)

FOB Price: 1.00 - 100.00 USD/Piece
Supply Ability: 1,000 Piece/Pieces per Week
Shipping: FOB Ningbo or Shanghai,China
Payment Terms: T/T, Western Union
In Stock
Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Place of Origin: Zhejiang in China
Packaging Details: WITPC box or OEM neutral box,if you need the paper pallet or wooden box is available

Quick Details

  • Brand Name: WITPC
  • Model Number: MAL20X50
  • Shaft Diameter: 8MM
  • Maximum Stroke: 16MM
  • Body Material: Aluminum
  • Power: Pneumatic
  • Structure: Cushioned Cylinder
  • Standard or Nonstandard: Standard
  • Cylinder Bore: Aluminum
  • Ambient Temperature: -10~60 Celsius Degree
  • Port Size: G1/8"

Specifications

WIT pneumatic --- MAL20X50 (ALUMINUM MINI AIR CYLINDER)

1.Brief Introduction:

(1) Designed with new seal material and buffer structure.
(2) With a simple structure,light weight,low starting pressure.
(3) Running balance,good sealing performance,long life,easy maitenance etc.
(4) Used in light industry,chemical industry,gold,mechanical,electronic and other industries widely.
(5) There are a variety of component option to attend different installation requirements.
  

2.Techincal parameters:

(1) Working Medium - Filtered Air
(2) Working Action - Double or Single Acting
(3) Ensure Pressure Resistance - 1.35MPa
(4) Max. Operating Pressure - 0.9MPa
(5) Min. Operating Pressure - 0.1MPa
(6) Buffer - Rubber or Air Buffer


3.Cylinder Installation Instructions:


(1) Before installation,be sure if the cylinder was not damaged during transportation.check if connecting parts were loose,etc.
(2) When installation,the cylinder piston rod shall not with stand eccentric or radial loads,the load must be consistent with the direction of piston rod axis.
(3) When cylinder installation,especially for long stroke cylinder,it must use level instrument for three-point position calibration.
(4) Before the pipe connects into air intake,it should clear pipe's burrs,pipeline without corrosion,after cleaning up and checked,can be installation.
(5) Speed adjustment: firstly adjusting speed control valve (one-way throttle) in the middle,gradually adjusting the output pressure of regulator,when cylinder speed is close to pre-determine speed,it can ascertain working pressure,and then using speed control valve for fine tuning,Finally adjusting the buffer speed.
(6) After cylinder installation,in working pressure range,to operate 2-3 times without load,checking the cylinder before if is working normally.
(7) At high temperature or corrosive conditions,it should use the appropriate temperature or corrosion resistance cylinders.
(8) In the occasions of humidity,dust or water drop,oil,dust,welding slag,the cylinder should be protected with devices.
(9) In low-temperature environment,it should take anti-freeze measure to prevent water freezing of the system.
(10) If the cylinder is not used for a long time,pay attention to the surface oxidation,the intake and exhaust ports should be added plug dust protection.

Slim Air Cylinder from this supplier

ROTARY PNEUMATIC CYLINDER (MSQ-B-20A)    
FOB Price: 1.00-100.00 USD/Piece
Min Order: 10 Pieces
ISO STANDARD U FITTING (DNC63MM U FITTING)    
FOB Price: 1.00-100.00 USD/Piece
Min Order: 10 Pieces
ISO STANDARD AIR CYLINDER (DNC63X100)    
FOB Price: 1.00-100.00 USD/Piece
Min Order: 10 Pieces
NEEDLE CYLINDER (CJPB10X15)    
FOB Price: 1.00-100.00 USD/Piece
Min Order: 10 Pieces
SC SERIES AIR CYLINDER (SC63X100)    
FOB Price: 1.00-100.00 USD/Piece
Min Order: 10 Pieces

More products from other suppliers

Oil Cylinder    
FOB Price: 1000.00-3000.00 USD/Piece
Min Order: 2000 Pieces
cylinder curling machine    
Min Order: 1 Set
round box & cylinder boxes & tube boxes    
FOB Price: 0.25-2.00 USD/Piece
Min Order: 1000 Pieces
Clutch Cylinder    
FOB Price: 2.00-50.00 USD/Piece
Min Order: 500 Pieces

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Mr. Wit Wang
Join ECVV community
Join Facebook Group