Hunan Kemeida Electric Co., Ltd.| Manufacturer
Hunan Kemeida Electric Co., Ltd.

China Manufacturer with main products: Electromagnet, Electromagnetic Stirrer(EMS), Magnetic Separator, Cable Reel, Hose Reel, Lifting Magnets, Rectifier Controller, Assistant...

Home  >Products Catalog > Reel of Recoiling Machine/Uncoiler

Reel of Recoiling Machine/Uncoiler

Related products from verified members

Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Place of Origin: Hunan in China

Quick Details

  • After-sales Service Provided: No overseas service provided
  • Brand Name: Reel of Recoiling Machine/Uncoiler
  • voltage: Reel of Recoiling Machine/Uncoiler
  • weight: Reel of Recoiling Machine/Uncoiler
  • Condition: Reel of Recoiling Machine/Uncoiler


Pay-off reel Tension reel Mandrel of the main structure form

the mandrel is the key part of hot rolling tension reel for coils. Coiling temperature is between 550 to 850 oC. the mandrel has mainly two types: link wedge type and double wedge type.
Unk wedge type can also be divided into two kinds: link wedge coupling drive and link wedge-spline drIve.
Reel of Recoiling MachineUncoiler

for link wedge-coupling type tension reel, the mandrel is mainly composed of rnandrel body, spreader bar, segment, link, wedge and spreading cylinder Spreader bar has multistage slopes and segment is supported by multistage wedge Segment is connected with spreader bar by link so segment does not drop off with compression spring in the middle of wedge, wedge can firmly contact segment and pyramid surface. There is a gap between the upper surface of wedge and segment, which can reduce the impact of coil head to mandrel during coiling coil. Mandrel body is installed on two bearings. Power is transmitted by crowned-teeth coupling in the rear. It is very convenient to dismantle, and due to there is no gear impact during working. Mandrel rigidity is improved. Lt' s very beneficial to control the dynamic tension.

the spreadding principle of mandrel: spreader bar moves inside mandrel body in axial direction driven by hydraulic cylinder, the slant of spreader bar pushes the wedge inside radial hole of mandrel body to move outward the wedge upper surface pushes segment to expand outward Wedge diameter will expand after coiling coils, preader bar moves in the opposite direction driven by hydraulic cylinder, and pulls segment inward to shrink through link Wedge moves inward and mandrel diameter becomes smaller to discharge state Then you can begin to discharge coil.
for the two types of link wedge-coupling drive and link wedge-spline drive, the mandrel structures and principles are same and the main difference is drive type of mandrel. for link wedge-spline drive type, connection between mandrel and main transmission case is spline, i.e. Insert type. When mounting and dismanting, mandrel can be directly insert or pull out of the main transmission case to achieve the rapid replacement.

the main driving motor dives gear shaft rotation through the intermediate shaft. the gear shaft drives big gear rotation, and the big gear drives mandrel rotation through spline.

for double wedge type tension reel, the mandrel is mainly composed of mandrel body, spreader bar, segment, spreader wedge, buffer wedge and hyd, cylinder.

the spreading principle of double wedge type mandrel: hyd.Cylinder makes spreader bar move and forth in axial direction and the wedge move in radial direction. so the segment become big. T-hook on spreader bar pulls wedge back and the hook outside the wedge pulls segment back. this will make the mandrel small. with spline connection for power transmission unit, mandrel can be rapidly replaced. Cooling water channel is inside the mandrel, so cooling effect is good. Lubricant can be injected by auto and manual tye, so is can reduce parts wear.

Pay-off reel and tension reel for cold rolling coils are used in cold rolling production line or pay-off when acid picking, galvanization, annealing, shear, coating or coil tension in outlet.

Cold rolling mandrel is the key parts of pay-off reel & tension reel. According to different structure, it has beam wedge type, pyramid axis type, pyramid sleeve type, wedge type, radial direction hyd. Cylinder type, etc. Or simply, open type and close type. the close type mandrel is a close circle without gap in the surface after expanding. It is suitable for coiling thin strip steel. the open type mandrel means there are a gap between segments after mandrel expanding, suitable for coiling thicker strip steel.

the beam wedge type mandrel is mainly composed of the main shaft, expanding core, segment, axial direction wedge, radial direction wedge and spreading cylinder, etc. There are two kinds of structure; with jaw or without jaw. The mandrel with jaw is used for coiling thicker strip steel. It can also be set with steel sleeve or paper sleeve to coil with belt wrapper. The mandrel without jaw is used for coiling thin strip steel by belt wrapper.

the mandrel will move along axial direction driven by the expanding core & wedge block, through relative sliding between the wedge block and segment, swelling and shrinking will occur in radial direction, reset by spring.

the pyramidal axis type mandrel is divided into taper type and back taper type according to the tilting direction of axis slope. this mandrel has simple structure, less parts, large main shaft, large main shaft section and high strength. so it can bear large tension, not only coiling, but also uncoiling. There are two kinds of structure: with jaw & without jaw. It is mainly consisted of the pyramid axis, segment, hollow sleeve and spreading cylinder, etc.

at present, the back taper type mandrel is most popular. the oil goes into the cylinder through a rod cavity. the cylinder pulls the pyramidal shaft backward along axial direction and push segment to expand outside, so the drum is expanded. Pyramidal axis moves backward along axial direction, and segment is pulled back by the T key, thus the mandrel is shrinked.

the pyramidal sleeve mandrel is mainly composed of the main shaft, pyramidal sleeve, spreading core, segment and spreading cylinder and so on. It is the most common structure. Because of its simple structure, good strength and rigidity, it is widely used in various units, its internal structure is diverse.

for the wedge tension reel, mandrel is mainly composed of the main shaft, wedge, spreading core, segment and spreading cylinder and so on. It is also a common structure. When spreading core drives the wedge, the mandrel moves along axial direction of the main shaft. through relative sliding between the wedge block and segment, it makes mandrel diameter swelling and shrinking, to reset the segment by wedge hook.

Service Process

Service Guarantee

  • Free Service Charge

    ECVV doesn't charge any service fee to Buyers for buying this product.

  • ECVV Supply

    ECVV is responsible for supply, and provides product quality inspection, fund supervision and supply chain services.

  • Product Quality Commitment

    ECVV China Sourcing Agent will assess the reputation and supply ability of the factory and conduct field trips to select the high-quality Chinese factories for buyers.

  • Deposit Service Commitments

    In order to improve the quality of service, ECVV will charge for a 100CNY deposit for the agent purchasing order, and the deposit will be part of subsequent purchasing costs.

    After paying a deposit, if the purchasing order is not completed because of unsatisfied ECVV services, ECVV will refund your deposit.

Ecvv Trade

Uncoiler from this supplier

4M Steel Sheet Bending Machine    
FOB Price: 2000.00-3000.00 USD/Set
Min Order: 1 Set
Stainless Steel Bright Annealing Heat Treatment Machine    
FOB Price: 11900.00-17900.00 USD/Set
Min Order: 1 Set
Solder Wire Spooling Machine, Sales1 @Xinkeju. Com    
FOB Price: 1.00-2.00 USD/Other
Min Order: 1 Other
XHL-L5331 4-Axis Desktop Blowing-Type Double Station Automatic Locking Screw Machine    
FOB Price: 100.00-200.00 USD/Piece
Min Order: 1 Piece
Folding Machine, Hand Folding Machine, Tdf Hand Folder    
FOB Price: 1900.00 USD/Set
Min Order: 1 Set

More products from other suppliers

Induction Heating Machine    
FOB Price: 5,000.00-50,000.00 USD/Set
Min Order: 1 Set
lead smelting complete equipment    
FOB Price: 166,666.00-177,777.00 USD/Set
Min Order: 1 Set
Automatic CNC Punching Machine for Metal Can    
FOB Price: 50000.00-150000.00 USD/Set
Min Order: 1 Set
30KW Super Audio Induction Heating Equipment Detailed    
FOB Price: 1,000.00-10,000.00 USD/Set
Min Order: 1 Set
Pile Cage Making Machine    
FOB Price: 1,000.00-60,000.00 USD/Set
Min Order: 1 Set
Cookware Production Line    
FOB Price: 10,000.00-100,000.00 USD/Set
Min Order: 1 Set
Expanded Steel Mesh Machine    
FOB Price: 10000.00-30000.00 USD/Piece
Min Order: 1 Piece
weding machine  MMA-315    

Can't find a suitable Supplier or product? Entrust ECVV to purchase the well-chosen Chinese products with high cost performance.

Learn More>> Start Safebuy Order

Communicate with Supplier

Lily from ECVV
Join ECVV community
Join Facebook Group